Search results for query: *

Hello, I just picked up a 1965 barracuda with a 273 commando in it. It leaks unbelievably bad from the front and the rear of the intake manifold. I heard that the 1965 273s have a little bit different heads than 66' and up. Could the leak be resultant of using a later aftermarket intake...

I have a friend with a 4bbl intake manifold for his Poly Head 318. We tried to bolt on a square bore carb, and a spread bore, but none of them bolted up. Any ideas on what type of carb goes on this thing?

Does anyone know if you can install an MSD box if your using a pertronix ignition unit? If so, which wirring schematic should I use? Thanks for looking.

Thanks for looking. I'm starting a landscape maintenance company in Southern Ca. and I'm looking for an inexpensive work truck. Can be any make or model, but I need to keep the price around $800.00. Thanks again for looking.

I aquired a 750cfm Holley Dbl pump. I put it on my car to see if it works, and after about 30 seconds of the car running. It started leaking out of the rear float bowl (or maybe between the metering block and the carb body) Anyways, is there any way to bench test these carbs for leaks before I...

Thanks for your intereset! I'm selling my 1965 Dodge Dart. Not only did I buy this car on FABO, I also built it with parts I found on FABO......... So thanks FABO!!!!! 1965 Dodge Dart Slant 6 904 Trans 71/4 Rear RUNS GREAT! Good Tires Good Brakes New Interior Currently Registered I really...

Does anyone know the intake runner size on 2'' valve J Heads? Thanks!

I'm building my 360....... again, and I was at the swap meet this weekend and picked up a set of 2'' valve J heads (complete). The guy selling them also had an Edelbrock Tunnel ram. After some negotiating I was able to buy the pair of heads and the tunnel ram for $300.00. But I'm not really sure...

I'm looking for some trim and misc. pieces for my Wife's 65' Dart. Her 30th birthday is coming up, so I'm going to finish up her car, but I need to locate some pieces first Hood Script Round little emblem that goes in the middle of the hood Trunk letters (spells out Dodge individually) Trunk...

I just came home from being out of town for Easter (Happy Easter everyone who reads this) and I decided to blow the dust off of my 70' and take it for a spin. I wound it up to about 6 grand in 1st, and 6 grand in 2nd. After that, I rolled off the gas and costed to about 50mph. Once I got back on...

I've got to give credit where credit is due here. I recently rebuilt the 360 in my Dart, and I wasn't all that pleased with the performance. I had bounced some ideas around, talked to friends, and spoke to the guy who helped me build the motor. After all was said and done, everyone unanimously...

I just put headers on my 78' 360. Problem seems to be that the header flages don't cover up the little smog port holes. So now I have a seriously nast exhaust leak. Any ideas on how to fix the problem/ fill the holes. I don't really want to take the motor out, and I don't really want to take the...

I recently purchased a Jeg's 2500-2800 stall converter (PN555-60408) and I just noticed that it has a special note which reads "Neutral Balanced. Use B&M flexplate with 10''BC and correct counterweight" I've got to be honest. I have no clue WTF this meansm so I called Jeg's. To;d them what I...

Looking for a +/- 2500 stall coverter for my 727. Let me know if you have one, or one close to that. Thanks!

I'm posting this for a frined of mine. He's looking for a good pair of 69' dart fenders.

I'm looking for a trunk mount battery kit. All I really need is the cable. Everything else I can make. Let me know please. Thanks!

I'm looking for a set of valve springs that will accomodate a .505 lift cam. For my 360. Thanks!

I picked up a cheap set of Jeg's headers (Based on the Hooker Comps)(Yes, the ones that go through the draglink)(No, because I can't affords TTis), and I'm looking for some tips and tricks on the installation. This is what I've got. 70' Dart 360 Power Steering Power Brakes. Any help wopuld be...

I've got a 70' Dart with a 360 in it. I'm currently using a flex fan, with no shroud, and I'm running an electric fan on the front of the radiator that I turn on when I'm in traffic. Which is working ok. I'd like to take off the flex fan, and move the electric fan to the engine side of the...

Hey Guys, I bought my wife a 65' Dodge Dart that was posted here, and I'm looking for some trim pieces, tail lights, and a steering wheel with hirn ring etc. Anyone got anything. I'm always looking for stuff for this or my 70' swinger. let me know.

I just dropped in 3:91s in my Dart, but I find that I'm all out of gear going 55mph (I'm not surprised) So I'm looking for a cheap way to go for overdrives. I'm a junkyard type of guy, so if someone could tell me what to look for, and in what type of cars and trucks, and what type of...

Hey, I figured I'd see if anyone was interested. I'm in a Southern California based car club called Drag'n Knight's. We've been around for 10 years, and all of our vehicles are Pre 75' American Powered Vehicles, we go to the drags together, swap meets, help each other out with projects, etc. A...

I want to know if anyone out there has any cool ways to mount a late model stereo in my dart. I don't want to hack out the stock stereo, and I was thinking maybe the glovebox. What advice can anyone offer. Pics would be helful. Thanks!

Looking for a dual plane intake elctronic ignition and a set of headers for my 70' Dart. It has a 360 in it. Thanks!

Need to get something a bit more solid under my dart. Not looking to get someone's collector piece. Just looking for some good cheap ideas. I'd appreciate it. Thanks!