Search results for query: *

The original pedal is falling off of my Barracuda. I ordered and received a new accelerator pedal kit with hardware and it looks fairly straight forward but I rather have instructions on the correct way to remove and replace the pedal. It has been awhile, since I played with my car and I do...

Is missing the bushing on the rod ? is it possible to just replace the bushing or does the entire striker need to be replaced? The door is vibrating at the striker because the bushing is gone. I have not found either a bushing or a striker in line.. Does anyone have some guidance for me..

My steering wheel shaft, on my 67 Barracuda, has so much play at the connection to the steering box, it is starting to feel unsafe. where can I take it to repair. ?? Constantly trying to keep it going straight.. **( Perhaps I am saying it wrong. The steering box was replaced, the problem...

How can I correct loose, sloppy steering on a 1967 Barracuda with power steering. It is to the almost scary to drive.

I have a 67 Barracuda conv't. It has a 360 roller motor with 390/400 hp. I had 3.91 gears several years ago but swapped those out for 2.93 for highway driving. I want to put new gears to restore some of the get up and go. What would be a good ratio? 3.55, 3.73 and still be streetable..

I have a 1967 Barracuda. Yesterday, Feb, 29, for unkinown reason my headlights will not turn on. What do I need to check?

Please, don't beat me up too bad. I am having a slight issue that I can't get right. I have a 1967 Barracuda. I replaced the 318 with a magnum 360 about a year and a half ago. It is a crate 360 magnum from Mopar. I used the 318 exhaust manifolds and there in lies my issue. I had to...

I am in need of the plastic air vents that are located on the lower inside of the doors. I do not know if all a-body cars have them or not. I would think they do. I am missing one and the one I do have is in really rough shape. I would like to find a source for these. Thanks for any help

On a 1967 barracuda does the headlight bezel go on first or the grille? I am putting them on, after paint, and I can't remember the order. I have the grilles on but it looks like I won't be able to slide the joint from the bezel onto the grille. It also looks like if I put the bezels on first...

Does anyone have any experience with reproduction exterior door handle for 1967 Barracuda? I purchased a set from New York restorod and was very pleased with their appearance and quality. Yesterday, in the process of putting parts back on the car, following new paint, I installed the passenger...

Can the studs, pins or whatever the proper term is for the attaching pot metal studs on the inserts be repaired? Both of my inserts have 3 and 4 broken off. Also the grilles have about 5 of the studs missing from each of them. I think I can figure something out for the grilles but I haven't got...

At the top of the window channel and vent window there is a black rubber stop that is shaped to fit the front edge of the window glass. I am replacing the channel runner for the window and this piece is damaged on my car. Does anyone know of a source for this piece? It fits on top of the chrome...

Parts for sale FOR SALE 1) (SOLD) Complete, intake to oil pan, Mopar 318 c.i., less than 15k since standard rebuild. Motor has a 280/480 comp. cam, new valve springs, hydraulic lifters and valves. The intake is a Edelbrock 318/360 Performer. Mopar electronic distributor. Valve covers are...

Need information on where to locate the attaching plates for this piece on the trunk. This is the wide trim plate on the trunk not the trim pieces. I have searched and cannot find them. Any clues???

Well, I just finished installing the ESPO 1 inch over stock springs and I am really a little nervous. I just lowered my Vert and measured the new height and it is 3.5 inches higher than it was. I hope everyone is right that it will settle, this is not what I was looking for. I have 17 inch...

I am installing ESPO XHD springs in the vert as we speak. I have a quick question, I haven't done this spring thing before so I need some tips. Is it necessary to remove the rear bracket to install the upper bushing? It looks like there isn't anyway to put new bushings in the upper part of the...

I gotta ask and probably there isn't a good answer. I am getting ready to buy HD springs 1" over stock for the Barracuda need them pdq. I read alot of threads about Espo, (Springs'nThings) so I checked with them and got a quote of 255/pr. plus shipping. So I thought I would check with Eaton...

http://s115.photobucket.com/albums/n319/jovico/Gatornationals%20March%202012/

I am just wondering what I should expect from a 4k paint job. I have talked with the shop and they say that they will remove fenders, doors trunk and hood. Repair minor rust damage to lower side panels in front of rear tires, (new metal), repair trunk and install missing trim to trunk, (I have...

I have a new Mopar 360 magnum crate. It has been in the car about 4 months, runs good, sounds good. It has about 500 miles on it and I have changed the oil once since install. It doesn't smoke and there are no oil leaks but I have had to add a qt. and a 1/2 of oil to it a couple of days ago...

FOR SALE 1) Complete, intake to oil pan, Mopar 318 c.i., less than 15k since standard rebuild. Motor has a 280/480 comp. cam, new valve springs, hydraulic lifters and valves. The intake is a Edelbrock 318/360 Performer. Valve covers are chrome Edelbrocks. It is assembled with ARP stainless 8...

This is probably a dumb question, but I really don't know. How do you remove the reluctor from a MP electronic distributor? I read somewhere that you use two screwdrivers and pry it off, marking where the roll pin is located? Is that the correct way? The reluctor appears to be made of some...

What do I need to buy to be able to limit total timing in a MP electronic dist.? Right now the car runs pretty good but I can't less than 45* total timing and it is all in at 2500 rpm. What is the kit I need to correct this? I am a novice and don't know what the kit is called. Is it springs...

All prices are PLUS SHIPPING. Open to reasonable offers. Pictures are available by e-mail. FOR SALE 1) Complete, intake to oil pan, Mopar 318 c.i., less than 15k since standard rebuild. Motor has a 280/480 comp. cam, new valve springs, hydraulic lifters and valves. The intake is a...

Wow, what stories are being told here about gas mileage. I have read with much interest the reported 12-18 mpg with 408 strokers and 360's, I say caca to this. What are you doing coasting downhill, never going over 30 mph putting it in neutral at every opportunity? My previous engine a 318 with...

Took the Barracuda out for it's maiden voyage today, about 70 miles. Some small issues I have to check. After about 35 miles I stopped at my son's house to check things out and to let him have a look see. Right off the bat we noticed that the gas was boiling in the carb.. The car was not...

I really don't know if I need to add a spacer to my carb and intake combo. I have a M1 intake and a Street Avenger Holley 770 on a magnum 360. Is it necessary to use a spacer? I reallly don't know. I had a small spacer on the 318 but I don't know if I need it now. Any help would be...

On August 24 I installed the magnum mopar crate, it runs good, not fine tuned yet, why? I don't know how to do it. It is not that bad but I am trying to take care of smaller issues first like exhaust leak I can't seem to stop. But today on the way back from a friend's house I punched it and it...

Hello, fellow mopar freaks, I need your help in locating a hemi or six pack hood for my 1967 Barracuda. The carb on the M1 intake doesn't quite make it under the stock hood. I am aware of where to get one new and if I weren't tapped out, I would. I have a dropped base on the air cleaner and I...

Does anyone have any suggestions for stopping exhaust leaks? I finished installing the 360 magnum in the 67 a week ago friday. I am still tying things up, wiring, tuning, etc. I am also trying to stop exhaust leaks at the joint for the exhaust pipe and manifold and I am having no luck. This is...