Search results for query: *

Well, not to much reply here on the subject. Called the talked to the guys at AMD and they stated Brand X(bxgauto.com) was a good dealer and have had no issues w/ sales or returns. I took the chance and save a lot of $$ on 100% AMD parts delivered to my front door. The guy there Ray Was...

any body heard or used brand x garage or bxgauto.com for sheetmetal? spoke w/the guy there the other day and he seems to be honest enough and have good pricing but just never heard of him befor. I called AUTO METAL DIRECT direct and they confirmed bxgauto.com is a dealer in good standing and...

flaring is simple off the car. the challenge will be the line on the car that cannot be removed. the real key to flaring is the right tool!!! there are kits for 20 30 bucks but you get what you pay for. eastwood has a flaring tool you mount in your bench top vice, but is 100% worth the $$ if you...

Hey all replaced my h-ballancer on my 67 dart(original engine)with one I got from a local yard. it slid righ on no issues. I am tring to time the engine but it looks like the timming mark comes up on the left side of the motor.. I mean when the light flashes i can see the mark in the appx...

any in site here?? 1st I have a 67 dart convert, did a disc break conversion w/a used set up. rebuilt the entire suspention: control arms and busings, ball joints, inner and outer tie rod ends bearings breaks...the works. new tires on steel wheels. wheels and tires ballance. ok... here is the...

hi all can some one tell me what the "correct" highs and lows for oil pressure are?? looks like i have appx 50-55 when i'm driving and appx 10 to 25 at idle.(once i have driven for a while) if this is low.....new oil pump?? this engine has appx 88k and runs like a kitten....no smoke on start up...

hi looking for the hood D-O-D-G-E individual letters also 2 14" trim rings and an entire a body antenna assy, antenna base and nut thanks

Hey guys, looking for a good used complete antenna doe my 67 dart gt. anybody got a good clean used antenna w/the base nut and cord?? thanks

Going to run 14" rallys all the way around. can any one tell me what is a good size tire to run w/out hitting the quarter lip or the lower front edge of the fender?? I did do a disc break conversion in the front. I have addressed the bolt patter issue but running 2 bbp 14"'2 in the front and 2...

Hey guys looking for 2-14" SBP and & 2-14" BBP steels-poss a good set of dog dishes too no tires just wheels thanks please send me a message looking in the very short term

Hey guys looking for 2 14" SBP and @ 14" BBP steels-poss a good set of dog dishes too no tires just wheels thanks please send me a message looking in the very short term

does any one know if you can actuall run the coy's 17 on a 67 69 dart??

any body make a replacment axel w/ the big bolt pattern for a 7-1/4 rear end??

Hey guys. I put a super six on my 67 dart and the original throttle cable seems a bit to long. Is there a different or shorter cable I can buy? any p/n or year, make, model suggestions to get a shorter one?? thanks

Any body know where you can get a repop lock strip for a 67 dart convert w/shield?? or can I use the strupp that comes in a roll that's on ebay>>> anybody got a new or repop lock strip????

hi what condition and $$ thanks

i don't have the wheels but would interested in your steels and dog dishes?? have the same bolt pattern issue

Hey all looking for a nice set of 1967 dart tail lamps and the trim on the deck lid for a gt and hood lip too any help or leads would be great

Any one know how to wire a mopar performance(silver box) electronic ignition for the old leaning tower of power??? The directions I received w/the unit are a tad lacking. Not very clear at all. the only pix in the direction are for a street rod or 100% made up wire harness..neither of which I...

aaaa

Guys, I just want to tell any one looking for a set of headers to use the hooker headers. Not only did I receive them from Hooker in 3 days but when I went to put them on the fell in to place w/NO MODIFICATIONS AT ALL!!!! once I hade the original intake and exhaust manafold off these fit on like...

thank you to all how responed..got a set up

Hey all looking foir a complete 2bbl intake, carb, and trans kick down liknage for a /6. Also looking for a header or set of headers for the same car. aly leads would be great thanks

Hey Guys, Looking For A Super Six Intake And Coplete Kick Down Set Up. Have Tried All The Loack Yards No One Seems To Have Them Any More. Also Who Besides Clifford Makes Headers?? Have Seen Posts For Hooker But Cannot Seem To Lacate The /6 Header..any Wib Sites You Can Direct Me To??

Hey all, just completed a front disc swap w/the f,m,j spindles. Caliper in the front. On my 67 dart the termination of the hard line is in back. Standarg 14/15 inch hose will not reach the hard line. Any one know if there is a longer break hose that will work w/ the later style slide caliper...

thanks guys for the insite. help is much appreciated

Can any on tell me if theses spindles are ok to use for a disc conversion on a 67 dart. Can only get a partial number off the spindle itself 34026(XX) last diget poss a 8they came with 11" rotors and the slide type caliper.

Hey guys found a partial casting # on the knuckle 34028(XX) cannot read the last 2 digets when I run the P/N on search this is what i get...sound correct to any one?? 401401019 76-81 R,W,X,SR STEERING KNUCKLE ARM 3402848 SOP or what is the p/n for the unicast knuckle..

Hey guys, i'm looking for a disc break set up and loacl mopar guy has a set, but.......he cannot recall what they came off.(yes a mopar) It has the knuckle, caliper and rotor only, no control arms.(well part of a lower) there are no #'s on the knuckle what so ever for me to refrence. the only...

Hi guys, swapping out my 9" front drumsto disc. Do I have to change the proportioning valve too. Or can I add an in line adjustible valve to the rear to correct any over breaking of the rear breaks?? Thanks