Search results for query: *

All I've a got a vibration in the rear of the car when I get above 60 MPH. I would like to R&R the drive shaft as I believe the drivie shaft is out of balance. I'm looking for suggestion on where to get a replacement. The other reason I want to repalce it is it has two differant size univeral...

All I have a vibration and noise that start at 60 MPH and increases with the increase in MPH. It seems to be coming from between the front seats. Any suggestions? 237 (4barrel) new motor mounts 833 Transmission (4 speed) new clutch Drive shaft new u-joints two months ago...

Demon 408 and cubamark Thanks, I will take a look at both. I have an auto hobby shop that can provide me with the tools I need.... Thanks Bear

CUDAMARK Does that mean a transmisson pull? Bear

All Jaws I filled it to it started spilling out of the fill hole. I did not check the tail shaft bushing, the transmisson was rebuilt two years ago. dgc333 It appears to be dripping off the foward drive shaft york. I don't leave the transmision in reverse, we use the first and...

I replace the rear seal on my 833, and it is leaking again, without moving the car. Could I have over filled it? H4 C 99129 H29P9F164315 PP 833 2900 0140 C9912816-2 Left hand side of transmission C95664-Z (8X13) Rear seal: TS85-63B Tailshaft Seal, 30 spline. Thanks Bear

All Contacted Brewer's and Wayne said it a 1969 18 spline 30 spline output shaft and to order his TS85-63B. Bear

All I have a leak at the rear seal of: H4 C 99129 H29P9F164315 PP 833 2900 0140 C9912816-2 Left hand side of transmission C95664-Z (8X13) I need to get the correct part number for the rear seal. Thanks Bear

All I figured it out. 67Dart273 you're right. The reserve shift arm was engaged and not letting the 1 &2 shift arm to move. Once I dis-engaged reverse, 1 & @ worked. WHAT A WEALTH OF KNOWLEDGE we have on the site..... THANKS ALL

Swedefish On the tranny. I took the rods off and could move two of the shifter mechanism on the tranny by hand. The middle one would move. With the rods disconnected I can move the shifter in all directions. Bear

All Just got done re-installing a 833 transmission back in our 1964 Valiant. After installing the linkage and shifter, I can get the shifter to do anything but go into reverse. I have take the linkage off the shifter, and the forward and lower shifter r arm on the transmission work well. The...

All I am afraid to ask BUT, do need to install the pilot bushing that I left out of my 883? Bear