Search results for query: *

Thanks for the replies, my carquest had been bought out by advanced at least my local one has. I will do some more looking. The blades say they are 16” but ive read where they are supposed to be 15”?

Are just the rubber wiper blades available? I know pushing the button removes the blade but it appears the blade will slide out of the plastic spine

Ahhhhhhh thats right

Which fender emblem are you referring to? I thought the pentastar was the only fender emblem on the demon

Yes!!!!! Satin black hood? Satin black stripes? Would look killer with that green! Plus you wont have to pull the engine and it will save you some money. I think the engine looks good in that green engine bay

I think its good the wheels are a darker brown tone like a dark bronze, will tie in with the interior

That will look killer!

What color?

I hope its coming together good for ya, seems like your on the home stretch

Since the hotchkis plates are only 1/32” longer on bolth holes on each side i would only have to open up the holes roughly 1/16” which i can live with, i contacted hotchkis to see if i can get them raw aluminum we will see

I guess they start to lift and move around scratching the hood lol, deff not worth $200

Packing List: 2 – Hood retaining pins 2 – Ball lock pins 2 – Top nuts (with holes around perimeter) 1 – Spanner wrench for top nuts 2 – Base plates (with three countersunk holes) 6 – 1” Long #10 Phillips head screws 2 – Hood pin plates *2 – Double-sided tape discs* Thats lame lol

Right but the hood plate doesnt have provisions for screw holes

Heres off the intructions on summit “Install the hood pin plates. Note that the plates will be attached with tape, so if the hood has been recently waxed you may want to remove the wax around the hood pins so the tape will stick. Tape the recessed bottom surface of each hood pin plate. Cover...

Just re did it with a straight ruler, 2” diagonally and actually 1-7/16” on each side I could slightly open the holes, wouldnt take much

I might be a 1/16” with the tape measure but thats the measurements i got

Thanks for the suggestion i may ask about that

I wonder if you could remove the anodization from them to make them a raw aluminum

Ive looked into the ring brothers ones but not sure how the hood plate attaches Edit: they attach with double sided tape, how cheesy, especially for $200

I know its hard to tell, some pictures look lighter than others

Thank you so much for trying to help! Not that i dont trust your guy i just want to make absolutely sure if they will work or not without re drilling. Thanks again. Im still not 100% sold on them but i think they would look pretty slick Not sure how dark they are but i think they would match...

Maybe someone else can double confirm the measurements, im going to contact hotchkiss to and confirm I thought about buying it and worst comes to worse i can return them but i want to double check before i tie up $160

I appreciate all your time!

Thanks for getting the info, i think he just measure in a square. Mine are 1-1/2” measured like this on all sides Mine are also 2” across ftom one another diagonally

Thank you!!! Huh, i wonder if he measured both directions like i have in the pics in the pist above, if the holes are square the distance from one hole across to the other hole diagonally should be longer than the distance from the holes measured on the same side Mine are in a 1-1/2” square...

Which way did he measure? I get 1-1/2 this way

Omg i bet shes a handful lol try to maintain your lane!

Thank you, sweet dart btw. Those bronze wheels fit that color perfectly

Please if wouldnt mind to i would appreciate it! I looked up their included instructions on summit but no mention of any measurements, i guess i could try to contact them and see if they have the measurements available

What is the distance between the bolts for the hood plate? Mine are at 2” Also the plate is 2.5” in diameter, not sure if the hotchkis one is bigger