Search results for query: *

I also have a LH 3614368 which would be correct for a late build '71, cast date is 5-13-71. This is correct for '72-'74, 340ci and 360ci.

I've got two sets. Where are you in Ontario? I can email you pics and what ever you need, PM me your email addy. I can ship or meet...

Hey John, How you been man? I just bought an '88, for the drivetrain, most of it is in really good condition, but that's not why I bought it. Is there a difference between, '87 and '88? Let me know what you need, you can see it all, when you come for Moparfest. I drive to Kingston regularly...

I have an AM radio out of a '70 Duster, it was working when pulled, a few years ago. I could get it tested, if you need a working one. It's the standard button style, not a thumb wheel style. It's missing the knobs, they might be around here somewhere. If this would work for you let me know...

There's got to be lots out there. Most that went with the Green bearings needed to remove it. Maybe do a search in this forum http://www.forabodiesonly.com/mopar/forumdisplay.php?f=34, you will likely find one there. Good Luck.

Well after searching high and low, I just can't find them, they'll probably show-up when I'm not looking for them. This sucks, sorry about that. Like the wife says, it's time for me to get rid of some stuff, and she's right, I have too much stuff I won't be using. Here's a bump for you in the...

I took a quick look this morning for them, there not were I thought they'd be. I'll look in the garage and the parts storage shed tomorrow, when I have more time. They're here somewhere, even the wife remembers seeing them not to long ago. There's a difference between open and sure grip ? I...

Alright... I'll bite..., is there a difference in the "spider gears" between a "741", "742" or "489" case? I've been under the impression that the only difference was the pinion. I honestly don't know, but I do have a really nice set of "spider gears", I don't know what case # they fit. They've...

I have some pot metal kit repair coming/ordered, I haven't tried it yet. It's from Muggy weld, I've read good reviews, and it's not expensive either. I need some practice mat'l, LoL, I'll try on your worst ones for free. But still a bit steep for re-chroming.

NOS reproduction out of Komoka, Ontario (near London), https://www.nosreproductions.com/index.php. Forbes Motorsports in Waterloo, http://www.forbesauto.com/motorsport/restoration.html. Ask for Dave Stanley, tell him I sent you. Not sure about the prices @ either place, but shipping and...

It's 4:30pm, and I just got back, I stayed probably another 1/2 hour after you left. The owner was the fellow that took us out in the shop, great guy, he gave me all kinds of pointers and a few of his personal contacts. I think he wants my hubcaps. Nice to see you again, I apologize for maybe...

It's free. I'm off at 7am tomorrow morning and the whole weekend, aside from a ribfest BBQ Saturday at 3pm. Let me know, just stay away from downtown TO, G20, LOL. Giles

Good news, both have good rubber, the plate will need cleaning and paint. Overall in really good condition. Let me know where and when or how you want it. I've already took it off and set aside for you. Giles

I've got one, or two, but likely the bumper will need replacing. I'll go have a look after diner.

Trade for a good V8 electronic Dizzy. Part # 3656763 correct for a '73-'74, 318 2 bbl, dated 10th week of '73, needs a cap, otherwise, nice and tight. The vacuum unit has surface rust, so not for show but mechanically fine. For a evening bump.

I'm looking for a slant 6 electronic dizzy in good condition, doesn't need to be perfect. I want to try and adapt it to my '38 flathead 6 engine, so it will get frankenmoded. I need test mules, cheap or free would be awesome. Thanks, Giles

Here's some pics of the one I have....I'll paint the base before I ship it. All the best. Giles

Is this the brackets that sits behind the alternator, and supports both hoses? Are they different in '73 then any other LA series. Does it look like this? If so I have one, not great shape but a touch of paint and you're good to go. PM me your mailing address and it's yours.

See EDIT @ bottom.! Ok....! So here's the scoop, I finally got to it today. Here's the good news, I had a 741 case with a great set of 3:23, so I got those for ya. Here's some pics, first the stamping Here's a couple of the ring, no burrs, scratches. And the 741 pinion...

I don't really want to do this, but shoot me your mailing addy and I'll forward it to you, since a matching pinion and ring gear (3:23's ) are not wanted. Can you cover cover shipping? Is all I ask. I'll take apart and ship. These are used gears, keep that in mind, I don't want to hear any...

All the gears I have here are 3:23's, I have 4 sets, but not for a 741 case and I wouldn't even give you just the ring gear. Try to find a set, not a good idea to try to fit two different wear patterns. I'll look again tomorrow, but I'm almost positive, I don't have a 741 case. Good luck!

Jim, why are you looking for an "X" head specifically? Some "J" and "O" heads have the 2.02" valves and are the same casting number "915" the flow will be the same. This will give you better odds at finding a single head probably. All the best! Giles

They are both being re-popped, are you looking for OEM's,or just driver quality?

Try this member http://www.forabodiesonly.com/mopar/member.php?u=113 All the best. Giles

Re-pro rads are available from Glen-Ray Radiator, not sure what #'s they have available, they have new ones regularly. A samll block rad runs @ $895.US, this is for a brand new rad, licensed by Chrysler, they are identical. I'll PM the contact info. if you're interested.

I was reading the plate numbers, before I read the first paragraph entirely, lol,I was wondering how you managed to get so many consecutive numbers.

Have you received the Ontario plate I sent you?

Wow Mike, that's a demanding list ! Gorgeous Demon by the way. A few of the items you have listed, IE: Batterie hold down, neg. batterie cable and the washer "T" are being re-produced, and they are great re-pro's. For the Thermo bolts, send Demon Sizzler (he's a member here) a PM, here's a...

Two Canadian plates coming your way, I mailed them on Monday, for a bump.

Want some Canadian plates ?