Search results for query: *

Here in New Orleans area I pulled quite a few out of A and E bodies still have one or 2 of each. All blower types

You said you used an epoxy. Read what you said Look I use name brand Evercoat fillers, primers. PPG epoxy dp40lf green, dp90lf black (Also comes in white) on top, Then as a sealer prior to paint. You think it with required reducers. And R-M, PPG, DuPont and SEM paints. No off brand stuff. They...

Lacquer paint is solvent based. Reduced to be usable viscosity by another solvent and spray away. Enamel and better Acrylic enamel. Reduced, and hardener is used as a catalyst. Probably what you are calling epoxy witch it is not. And probably what you used 20 years ago.

Certified painter here. Trust me lacquer is not epoxy. I am done. Not going to fight with you about it. Go read about paint.

Does not matter even PPG sold premixed 9300 black. You missed the point if lacquer it is not an epoxy product. No chemical reaction. Read up on paint types.

Lacquer is not epoxy. It is lacquer paint mixed to color, a single stage that can also be cleared. And is reduced with a high quality lacquer thinner to get the right viscosity to spray it. As as well as right temp thinner. Slow, Medium, Fast. No gardener is used. Lawyer is not epoxy. No...

Organisil has a very, very light texture. Looks like a sheet of 360 wet to 220 wet black sand papers. Keep in mind decals were on hoods and E Body spoiler. Not rough. It also has a metal flake look. That is what makes it look rougher than it is. Has a combo of Black, Gray, Silver Argent, kinda...

MOPAR Automotive Restoration Paint – 8774paint1

Organisol

Note Dart Sport and Duster used diff scoops. Diff hood shapes. And the 1973 Dart ones can be used on 1969 Barracuda hoods

All cars are not the same. I put six packs on 5 A Bodies and like I and someone else posted above 4 worked fine. Nothing a little help never fixed. BTW the intake you have is of the last runs of Mopar ones made.

Air cleaner hits the brace scoop has nothing to do with it. 3 speed motor tucks up under instead of pointing out.

If this air cleaner is used the hood brace will hit it where the dark blue is in this pic you need to clearance the hood brace

Paint pen. Or use Wife / GF finger nail polish. Be careful.

Sounds like we need a, A Bodies Only Bookie. We buy him mouldings and see. Or maybe some dice. All kids in aside if he does get them start in middle with attaching and work towards the ends.

99.9 % chance that the shape of the quarter is no longer correct.

The flat face on those and NOS ones are not the same. If that mattered

Wipe with wax grease remover. Shpot a few coats of Bulldog adhesion promoter. Then any paint ya want

I sent you a PM.

They are flat and Phillips heads. I get mine from Tom Race along with piles of the right nuts, bolts, screws clips ect. Toms a good guy. R/T supplies other Venders too

Flat, or semi may not be filled enough with the gloss paint. If it is not sanded to a flat surface. The paint should be sanded with 360-400 wet, primed, to fill. Then sanded ( if a sandable primer is used) and painted for best results.

That's because it is a China knockoff. A good one. My friend's body shop keeps a few of them new in box for when his good gun is down or shooting more than one car at a time. So he can shoot one thing walk next car an shoot again for no down time. Seen him shoot 3 jobs same time one to next, to...

Anodized aluminium. Must be stripped poilished and re anodized

That's a,74 up thing. Tail lamp bezel and center section They were when new pot metal chrome plated and then the recessed parts were painted silver. Best to go d a better used ones. As the post metal is full of holes now on yours To replace any post metal or paint is work. Plating requires...

Yes brite dip anodized with a matte-semi not Organsol. I would tape up all.the clear anodized part, and do a lite clean with common wipe down used to wpr cars down for paint. It will remove wax grease. Then scuff the black with a Gray 3M pad. Then wipe with wipe down again before paint. SEM...

That is how shops did all the ghetto gold you used to see. Strip the chrome and gold on top the nickel. We at the body shop blasted the chrome with the 110 pound pressure pot. Wiped it with laqure thinner. Shot with DP40 PPG. Shot paint. Or if rough shot high build 2K like Slick Sand on top...

Yes after you scuff it "So you have adhesion"

Reason they say scuff is most epoxy gums up paper. It is intended to be coated over while open. If not then suffed and recoated with more epoxy. I use also epoxy ( PPG) as,a,sealer ontop the final sanded high build primer before paint as a sealer. Insurance

.I would also still recommend looking at the tech sheet before just scuff and shooting. You do not want stuff peeling off later. The PPG sheer says after the open window has closed to scuff, and reshoot with a coat of PPG DP40, 90 etc I would assume it is a mechanical and chemical bond. Then...