Search results for query: *

So does the hinge with the little wheel go on the bottom? I'm thinking mine might be put on reversed.

Are the front door hinges the same between a 2 door and a 4 door? I need to replace one of my hinges and not sure if they interchange between the two body types. I would assume so but want to make sure. Also while I'm asking, the hinge with the little wheel goes on top or the bottom? Mine is...

I removed my back window by myself but it wasn't easy. Kinda hard to push on the window and hold the gasket back at the same time. So what I did was I had some sheet metal strips about 8 inches long. I put a bend in them about 1/2 inch from one edge. I then used them to wedge between the...

I think the VIN question is best asked of your local BMV or state police. The VIN plate can be changed but then the body stamped VINs would not match.

Well it appears I may have two different year doors on my car. The passenger side is designed for a cable lock knob and the rest of the car has the rod type knobs. So I guess all else being the same, I need the rod stuff. The driver's side door has two screws on the inside edge which I assume...

I went to change my lock knobs and discovered the right rear door lock rod is gone and someone rigged a cable in place of the linkage. The knob was barbed onto the cable and would not come off without breaking the cable. So I am looking for the rods and bellcrank that go from the lock knob to...

While working on my headliner I decided I needed to remove my back glass. I removed the locking strip and loosened the gasket around the frame. When I went to remove the glass I realized I needed another person to push the gasket away from the glass while I pushed from the inside. Well I was...

Saw these on e-bay. Thought some of you might be interested. http://cgi.ebay.com/ebaymotors/1963-64-DODGE-DART-HEADLIGHT-BEZELS_W0QQitemZ290315381355QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item4398252a6b&_trksid=p3911.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318...

I got a beautiful set of stone guards from Waggin and it seems there is a place for a trim clip about midway up the guard that would pull the body side of the guard tight. It has a slotted opening which I assume is for some sort of clip to hold the guard to the body other than the 3 screws that...

Bleach will actually turn it yellow just like it does clothes after awhile. That's why you use blueing and why fabric softner is usually blue to turn the clothes white again. Might try using hydrogen peroxide if it does not harm the plastic as it will bleach things white as well. Leave the...

I just keep the inside nice and dry....no more frogs. Sorry...couldn't resist.

Very very impressive!! Now I feel guilty on the trade. I want to see what you can do with the rings I sent you so be sure to post the same magical pictures of those as you did with the stone guards. Can't wait to put those on the car. Will definately post a picture for all to see your great...

Gee Waggin, I just got home from work (look at the time stamp) and what a plesant surprise from you. Kinda ruins the fun opening the box when you send them but its even better to watch how you fixed them. I really didn't expect you put so much work into them but it is indeed really appreciated...

So if it is cleaned properly, I just reinstall the gasket and reuse the same locking strip? Any issues with sealing back up if you follow the normal steps you would with a new one?

If I remove my windshield and the weatherstrip is in good shape, can I reuse it? It's the type with the locking strip. Just want to know what to plan on when I remove the windshield for some other repairs.

I can honestly say never. I wouldn't even attempt it. Sorry but I just love typos that really say the wrong thing.:snakeman:

Thanks for the pic Harrison. Did you get the parts yet?

I pulled the trunk mat in my car and fixed some surface rust. While taking out the spare, I was missing the hold down nut and the little round plate. I happen to find these between the rear quarter and the trunk rail. Question is how do these mount to hold the tire? Does the jack base go on...

Question on how the battery cable should be run in the engine compartment. It doesn't seem the cable is suppose to run along the inner fender, along the firewall and over to the starter. Should it just run to the starter in a mild curve or can it be tucked in closer to the edge of the engine...

He always seems to have real nice stuff, just asks a very premium price most of the time. If I had a Valiant, I would have bought them.

Yeah based on his prices for everything else, that's the bargain of the year. If you need them, I'd get them before he realizes it's missing a zero on the end of the price!

If you use a solder with flux, make sure you clean any extra flux off the connection and surrounding area. Flux will draw moisture after time and may corrode outside the soldered area. Look at an old circuit board that hasn't been cleaned of flux and you will see a white powder residue on it...

Health code requires that if you are deep frying while driving, you must install a vent hood. If you are showering while driving, building codes dictate an exhaust fan must be installed. If this is still defogging from a trip to lookout point,,, then good job and carry on.

Another very big thanks going out to Cosgig and Vdart for their help with getting my backup lights and shifter up and working correctly. I got the trunk wire ran today and the shifter turns on the backup lights just like it should. My car did not have the backup lights from the factory so I...

Anyone have a decent driver 63 170 hood emblem? Mine is cracked to pieces on the insert part. There's one on Ebay for $100.00 but that's a bit much. I am also looking for the mounting nuts used on the hood emblem and the interior trim pieces for the dash. Need about 8 of them. They are the...

Hey Longarm! What yard did you go to? Did they have any early 63's or 64's? I used to go junkyard hopping in Columbus every weekend.

So your 63 came with the washer tank? Mine had nothing for washers but I thought it took a jiffy bag and not the plastic tank. Do you have an electric pump or a foot pump?

If you are talking about replacing the tail lights with the LED strips and clear lexan, you might run into a safety issue. Remember you must also have a reflector as part of the tail light assembly. This required by law if the car had it when manufactured, which it would have. The stock...

If we had some scale to it maybe that would help. What are the dimensions of this item? What size bolt would fit the captured nuts? Who out there has a duster they can diassemble until they find this part on it?8)

Wish I could some credit but I bought it that way just last October. Been trying to fix the little things and replace the missing things like the washers and visors. Can't believe washers were an option in 63.