Search results for query: *

thanks i think i can squeeze a little more out of her on another note got a new engine i picked up 318 standard bore steel crank,rods,and forged pistons i wonder if I can make it run we'll see.

little update best so far on my combo 12.16 111 mph my combo on page 9 or 10

i think you will be in 12's easily sounds like a nice combo

Has a 8 3/4 b body rearend in it 15x7 factory rims

best with old setup was 13.39 drove real nice on street nice sound to it i picked up this current 360 in trade 40 over flat tops no valve reliefs pistons in the hole looks to be stock replacement pistons i got some rpms off clearance rack at summit and called hughes engines for camshaft...

well finally have an update on my car with new combo 73 Duster 360 40 over pistons in the hole (got motor but with iron heads in a trade) eddie's rpm heads 63 cc bee hive springs stainless rockers Hughes solid cam 238/242 duration @50 .558/564 stl3842as-08 rpm intake 750 holley HP 1 5/8 hooker...

can you give us a your engine specs makes a difference on launch technique car should easily be 2 seconds quicker

need to go back to their roots factory car bodies 2500# limit 6.4 c.I. maybe a spec supercharger and see what happens Anybody remember Jr. prostock back in early 70's if I remember correctly very short 2 seasons maybe

I don't know when ohio tracks open but horse tracks have opened go figure if anybody knows about social distancing is drag racers plenty of room in staging lanes you have room in stands and on fences too national events are a different story they act like we are stupid and have to hold our hands...

When he opens up Ill be there plenty of social distancing a staging lane.

always out of 1.5 ratio rockers it seems BB or SM

I had a 70 Dart weighed 2960 with me in it 451 stage 6 heads and a Comp 625 roller 10" converter 850 and 4.56 gears 29.5 slick best 1/8 6.39 your car with b1's should easily have 700 hp and run low 6's in 1/8 keep us informed on some track time

65 mustang 289 auto single track 17.50 track prep in 70's not greatest.slowest car I ran against I had a tube chassis Daytona and passed guy at 142 mph he went 75mph I won!

I have a different motor in car and need some TNT I also run in heads up at Muncie in my 67 belvedere Ill be there 5-18

Seen your car at Muncie real nice car, the car in my avatar I have raced at Muncie but has been repainted its original red maybe you seen it.My car had 3.21's and a 360 in it and a 3000 stahl converter and would 60 high 1.80's run 13.40's 13.50's in heat you do some tuning like everybody said...

nice car and that's getting it!

Here is my combo stock 360 MP .508 cam 3000 stall converter edelbrock RPM intake 750 Holley HP carb and 8.25 rearend 3.21 gear frame tied exhaust dumping at rear and M/T 255 drag radial best ET was 13.39 at 100 mph normally mid 13.40's car has full interior.

sold my 70 dart but my combo at 3000# 451 13.5 comp 625 comp roller victor intake 1000 Holley HP ladderbar car 3800 stall converter leaving at 3000 on brake 4.56 gear 29.5 tires stage 6 heads ported by compu flow best 1/8 6.39 1.39 60ft 108 mph best 1/4 10.09 133 mph

73 Duster full interior a/c car rebuilt 360 stock heads trick flow valve springs MP 508 cam weiand action plus intake and holley 750 hooker headers 1 5/8 Ignition MP chrome box 727 trans 3000 converter 81/4 rearend with 3.21 single track M/T 255 drag radial couldn't hook good some back...

Ryan it is a ladderbar car with a 750 Holley street HP I also run ProParts headers.Just ordered a Tranzact ultimate brake for it.You can make those smog engines run.

70 Dart 3000# 440 RV motor 8.5 comp 516 heads with mild port 2.14 1.81 valves .590 MP solid 4.56 gears 3800 coan foot brake 9x15x30 tires Best time 7.04 98 mph 1.50 60 ft

Man your combo should put you deep into the 10's even high 9's.I would go to the victor intake with the dominator and you would probably run nines.Motor is capable of easily handling 7000 through traps. My 70 cuda weighed about 3200 with me in it with a 451 stroker running iron heads with a ss...

My Dart swinger weighed 2960 with me in it.2800 w/o me.I have an all glass frontend.Bolt on AAR hood with light weight springs.I have all original glass with stock rear bumper.This is a BB car.Ladder bars QA1 shocks.Mini tubbed.8 pt.CM rollbar.I have Wilwood brakes up front drums in back.I was...

Something else to check out is your coil.I had an Accel stock looking unit.Had same problem with my cuda.Wouldn't rev and after awhile of driving would shut off. Let car cool and fire right up.Checked everything and changed orange box,still shut off.Pulled the coil wire off and oil was coming...

I have bought my fenders for a 70 cuda and a 70 Dart from Walt at WS and both are very nice quality.Everybody thought I had real fenders on my cuda.Dart is in progess of being painted and fenders look real nice on it.I use all original pieces on fenders,headlight buckets,grille and side...

We always have a nice turn out of Mopars at Marion Co.International Raceway in Larue OH.I think it's the closer to Detroit the more Mopars.

sounds good.

I would be interested in your parts.I'm located near Lima OH but my daughter's boyfriend works in Cols and probably could pick it up.Give me a call 419-236-4925 Any pics would help.