Search results for query: *

Thanks guys!

Getting a '74 Dart sport running after it’s been sitting for a long time. It’s a console shift car but some of the linkage is missing. What exactly do I need to connect the shifter to the trans? I'm guessing there should be a bracket that attaches to the trans and a link going forward to the...

what's the difference between the two? Is it the trans mount they take or do they mount to the body differently? I'm looking at getting a 71 E body rolling shell and wondering if the crossmember I've got in my pile of parts will work. thanks

anyone?

A bit off topic but does anyone have a picture of an E body trans crossmember?

that's what I was wondering. anyone know how much closer the engine is to the steering box on an early A? I'd guess power steering would probably be out but a manual set up might be ok.

mine lasted 6 months behind a stock 360 4bbl and a 4 speed in my '63 Dart including some burnouts altho that was on 20+ year old 5.60x13 bias plies... broke a big chunk off the crown wheel when push starting the car one day and swapped in an 8.25 - no problems since.

Anyone know of a good machine shop for narrowing 8.75 axle shafts? Preferably in the Los Angeles/Orange County area. thanks

i believe Tremec transmissions have the same bolt pattern as toploaders so possibly a Keisler bellhousing would work

Are all 904 covertors 10" bolt circle? Specifically, would you expect a 70 Charger with a 318 to have a 10" bolt circle convertor?

looks like it's actually a small block trans. thanks

I've got a big block 727 trans and I wondered if anyone could tell me what the original application for it was. The numbers I've managed to find on the case are as follows: 753-4 in large numbers on the drivers side of the bellhousing area 2892758-4 upside down on drivers side of trans...

cool, thanks!

Anyone know any good sites for info on thes rear ends? I found a really good site a while back but forgot to make a note of the address and can't find it now. The guy had a whole bunch of tech stuff written in a no b.s. fashion and a note that he wouldn't allow links to sites that didn't have...

thanks 440 Scamp, guess I'll have to be pretty careful with my wheel and tire choice...

I have the opportunity to buy a bare A body 8.75" housing. Can I use brakes from an 8.75" equipped C body if i get custom axles? How much wider would this be than using the stock A body brakes? I recently bought a 65 V8 Dart parts car with a 273 and 7.75" rear end. The brake drums are bigger...

Hi, is ATF3 compatible with Dexron? I've checked previous posts which say which fluid people are using but I couldn't find one that says if the two fluids can be mixed. Thanks