Search results for query: *

i need one of the axel gears for the old style power loc, its about a 1/2 " thick, cant do anything with my car till I get one, can't afford to buy the dr diff kit at this time but have some funds to buy a used one in floral city florida 34436

your probably gonna need dual breathers coming from the valve covers in front of the air cleaner.I raced figure eights for about 15 years and it was a major improvement to keeping oil inside the engine at higher rpms they tend to blow the rear main seal

Ya'll look like yur gittin along now....Kudo's :)

ya'll try and play nice....Thank You

see rule number 14.....W-2 heads and intake aren't cheap....put a set of 302 heads on a low compression 360 and have them opened up to the 360 188. 160 valve size to keep it in the spirit of the rules for suspension keep her soft. chuck the sway bars to let the body have some movement...flip the...

It's neat as is but paint ain't gonna slow it down

Congradulations Scott, you'll always have that first win memory tucked away to keep a smile on your face.....awesome!!!!!!!

I ran the 4412 holley on late models and although i was allowed a four bbl ran it on my pro figure eight car also, very consistant coming out of the corners and very crisp throttle responce

Prayers on the way

so how do them hemi barracuda's hook so well with just superstock springs and a pinion snubber???

check in the rules for your track....if you get caught you know what that means.....adjust the car with what you have and adapt until you can get the right stuff for it

valiant's and dart's are 112" wheelbase you'll be fine with the b body availability of parts and already has big bolt pattern stuff on it

need to post a set of rules for the class you are going to run,I'll figure out where the "grey" area's are and git you thru em,if you are not allowed to have subframe connectors I have a way to tie the subframes with the rollcage that will pass thru tech,for handling we need to see what is and...

I have that manual....and a few others that are helpful

I have ran and won in a mopar street stock and doubled as a figure eight car and won...against all odd's and against the best racer's available the first time I did it, yea there were a few that said a few more lap's and they would have had me.....funny thing is it was a 20 lap race that the...

I run a 72 340 with 10:5 to 1's on 87 octane ran awesome till the new gas with ethanol came around...the afb would not restart when hot....hold her to the floor until it started.....switched to holley and 2" spacer changed timing......awesome only had spark knock after sitting in traffic till it...

I'm no seasoned drag racer but i'm at your service if I can help let me know....you too mike

still looks like a street car just needs a tag......I will add it's a nice lookin street car...... :)

ahhh I can smell the burning rubber....my favorite smell!!!

very good idea to have one even if they don't require one

Is my waggin or duster eligable for this....they was built on the cheap! gas mileage what gas mileage? we don't need no stinkin gas mileage it's smiles per gallon :profiler::profiler::profiler::profiler::profiler::profiler::profiler::burnout...

try adding a breather with the tube going to the air cleaner it will pull some vacume at all throttle positions.....couldnt hurt...

sometimes an engine will need a modification to go with another modification. It is always best to locate a problem and correct it rather than applying a band aid. for instance lets say you street drive the car more than you race it and suddenly it develops a rear seal leakage problem.......(and...

Drag cars use a scavenging system whereas they install an agled bung into the headers and is basicly siphons the emissions from the crankcase....it works well at full throttle......pcv system was intended for street use.....

i'm gonna have to side with ssdan on that, oil aint gittin no cheaper and it sounds more like something ailing in the valve seals or the guides, jmo

check to make sure the breather is not clogged up and the baffle inside the valve cover is not missing or sludged up,removing the pcv will cause a rich condition and fuel mileage will suffer

They even mandate what size and mannor to fasten the battery and box to the frame of the car so check out them rules before ya go at it blindly

Good Job Way To go ^5 dude!!!

Link removed just incase

distributor off a tooth