Search results for query: *

Hey guys, I ran into this issue a couple months back but put it on the back burner until I was closer to having the car on the road. its a 72 duster,small block, 904 trans,transgo tf2 shift kit ( I did not use the parts to make it full manual ...just the shift kit). I have a stainless braided...

Hey guys, I got a pumped up small block in my 72 duster, 904 auto trans, tci 2500 stall converter,b&m pro ratchet shifter,trans go tf2 shift kit, 28" tall rear tires, 8 3/4 rear with 742 center section and a clutch sure grip.4.56 gears Here is the thing, Ive been restoring the car over the...

hey guys, just now getting around to inspecting/servicing my 8 3/4 489center SBP rear end (had a leak at the center section and I also had a growling noise while driving).....anyhow, leak was due to a bad seal and the growling appears to be from a missing axle adjustment lock down tab/previous...

heres the scoop. my 904 auto in my 72 duster has what appears to be either a leaky shift shaft seal or kick down shaft seal. either way it looks like I have to drop the pan and valve body to swap in new ones. so I figure, if I am going to drop the trans pan and valve body I might aswell look...

well I did a bunch of looking around for a speedo gear over the last few weeks (I have a 28 inch tall tire and 4.56 gears which calls for a 43 tooth gear) and year one wanted $89.00 plus shipping for it and I couldnt find the size I wanted on ebay and I called the stealership and they told me it...

ok so awhile back I installed my trans and my B&M pro ratchet shifter. while I was down there I removed my kick down bracket from the trans because I figured since I didn't have any of my kick down linkage anyhow ....I would just manually drop down a gear by hand with my shifter rather than...

I checked my bolt pattern on the duster and it looks like I have 4" all the way around. I was thinking since it had an 8 3/4 out back that it was going to have LBP in back and SBP in front. I was assuming this rear end was transplanted into the duster at some point in time because it has had a...

I have a 72 duster with a 904. My cable didnt have a speedo gear on it when I got it (I have to get one) I have it just sitting in the tranny so I didnt have an open hole in the side of my trans ....I noticed my speedo cable has a melted spot on it. I see tranny fluid dripping out of the bad...

Hey everyone.....I am about ready to fire up my engine in my duster that some of you may have seen my build thread on over the passed year. but before I do that I need to know how much and of what kind of fluid I need for my trans? its bone dry,no fluid in the trans or converter or lines or...

Ok.....as some of you know I am in the middle of restoring my 72 duster.....anyhow... I am hoping someone can answer a question for me real quick. I am putting the trans in and I need to know it there is a dust cover (metal sheild) that goes on the lower portion of the transmission bell? and I...

I had originally posted this in my build thread as an update but I figured I would post it in a new thread to catch more attention. I would like to tell everyone I made some progress but it would be a lie .....KIND OF..... I decided I was going to put my tranny in. I lubed the splines on...

My 72 duster I knew had an 8 3/4 in it and i knew it had recently been built with 4.10 sure grip prior to me buying it but I just recently checked it all out while I was in the middle of bleeding my brakes off and I took pictures and took note of the part numbers. I have a few questions for the...

so I was looking at the TCI SIZZLER 141338 torque converter on summit racings website but I am leaning more towards the 2500 stall range.....does anyone know where a good deal on a new one is? the cheapewst I have found so far is about $300.00 and I am on a budget so if I could get it cheaper...

I was told its a 904 tourqe flight but would like to know for sure what it is and what year it is because I need to get a torque converter for it....which do I need? any suggestions? also does everything look normal and correct to everyone? I pulled the pan off and everything looks brand new...