Search results for query: *

https://www.hotrod.com/articles/la-engine-kicking-ls-butt-dyno/?sm_id=organic_fb_HRN_trueanthem&utm_campaign=&utm_medium=&utm_source=

Being in lock done for the second time and plenty of time I’m my hands I’m warming to the Idea To one of these . Torque storm centrifugal blower Some details first 67 Dart 408 stroker full forged scat rotating assembly Full studded with girdle ,Alloy head , 9.85 comp ratio duel plane Rpm air gap...

The Mailman delivered this today. Looks like a nice piece and I hope it helps controlling some crank case pressure I’m having . Engine doesn’t burn oil, it just pushes it out of the rear main not bad but noticeable If I run it the std way one passenger side pcv drivers side breather if I run the...

Has anyone checked out the price reduction on these heads not a bad price fitted out.Sorry couldn’t edit the BB heads off copied and paste off the email . Private Label Heads We went to Edelbrock and made a run of cylinder heads without any logo's on the ends of the heads. They still have...

Hi all just chasing some info as I'm doing some top end work and I will be backing off all rockers, adjustment is 0.16 intake 0.18 Exhaust hot. What would be cold lash adjustment. 318, solid 268 flat tappet EQ mag heads, Crane 1.6 Gold rollers. Thank you

Good day all I just received my kevko oil pan and pick up and I was doing a mock set up on my 360-408 block. I fitted the oil pump to check pan clearance as I'm running the HV 72 and test fitted the oil pick up. I needed to adjust pick up as it was sitting too high after some adjustments now I...

Good day Mopar brethren I'm looking at purchasing this oil pan for my 408 build as I'm gathering parts before block is sent to my machinist Milodon Street and Strip Oil Pans 30941 , Has any one used this pan and had any fitment issues eg- sump hitting K member or any interference problems ?. I...

Take a look at these lifters do they look damaged ? lack of oil as the discolouration above the roller. These are for sale and it states very low use 1000kms but when you zoom in on the pics some lifters have nicks on the body but they look like they have got pretty hot at one stage. 2nd pic...

Just got a lot of goodies from summit for my 318 build and now all im just waiting on my EQ Magnum heads with the 1.6 rollers & Eddy manifold,so i wanted to compare weight differences on std pistons to KBs 167s,wrist pins and std rods to the scat i beams.All i can say is wow what a massive...

Hi all looking for some advice,first a run down on my 318 that im building its a LA 74 block,which is Zero decked,40 up ,torque plate was used in the honing process,main bearing caps were lined honed, ARP mains bolts,balanced,steel crank 10 under on mains and big ends,scat i beam rods with the...

well it starts off like this ive pulled down the 273 to give it a full rebuild and i find out that one Head is different than the other its suppose to have the close chamber 902s which one is but the other has the 675 open chamber?????? WTF I was quite surprise it ran well considering, Now i...

Hi all im just looking for some advice as i have the 273 commando engine stripped and getting ready to be machined. Ive purchased some scat i beam 4340 rods and i was wanting to know is there any particular way in installing these rods from one bank 1,3,5,7 to 2,4,6,8.Thanks in advance!