Search results for query: *

Really nice body on this 73 Roadrunner other than this in driver side jamb. How is this repaired properly ? What caused it ? Any other issues I should check on behind this area ? Im posting here due to a few more members than B body site (for now). Thanks.

How can I know if my 70 came with 1) bumperettes and 2) fender mounted turn signal indicators ?

I'm looking to buy a complete 71 340 car I came across - can't get to the fender tag just yet. Did all the 71 340 cars come with the sharktooth grills and 2) did all 340 cars have the black hoods with the "340 wedge" decal ? If not - what codes am I looking for or can you direct me to a decoding...

If a 1970 A body came without undercoating, would it be body color underneath ? Mine has no undercoating but appears to be painted black. I know some of the other bodies came painted undersides.

70 Swinger - were the blades 13" ?

I was sent the wrong rollers - nice try by a vendor. On my 73 Swinger ... I need the nylon roller (or assembly) that rides in the rearmost track - sits at a 45 and the roller is gone leaving the stud with the 3/8" or so steel ball - know what I mean ? Appears to me the roller itself may not be...

Looks like doors are the same on all Dusters, Demons and Dart Sports ?(shopping for a rust free pair). Thanks.

We got the back in - the front ain't so easy. We can set the glass into the bottom groove and get the gasket around the glass about half way up on each side, after that it's too tough. Gasket is set in place, using plenty of WD40 and plastic tool used for this purpose. Should we try using some...

I found a set of front bumper brackets off a 72 Demon. Will these work on my 72 Swinger ? I'm guessing yes but want to qualify here before I pick them up. Thanks.

Bought a set ... they're (hopefully) close enough. Anyway, there are 4 each in the set that are different ... I see where two may go at the lower bottom corners due to the channel being "shallower" ... the other two ? Thanks. 73 Dart Swinger.

Finally bolted it on tonight to test fit (already painted, drilled for dual scoops, had it for a year). Bolt - on hood using lightweight springs. It fits fine around perimeter, sits flush on all four corners but - bowed above fender on both sides nearly a half inch, also bowed across cowl. This...

I posted last night - felt like an idiot 'cause it's been about three years since disassembly. This ain't like early A's - it doesnt have the screw holes - soooo ... am I missing a part here ? Maybe a flange of some sort ? #8screws obviously won't grab - anybody with a 73-74 - could you take a...

Gas filler tube on my Swinger goes through the body from outside with foam gasket behind the flanged end, then screwed to the body - correct ?. The reason I'm asking - when installed this way, the gas cap I bought which is supposed to fit Swingers - stands a half inch off the fender, it'd fit...

Base/clear job Nason products - how long before applying graphics (bumblebee) ? Thanks

Anybody have a 73 or later Swinger with vinyl top ? I need a picture or measurement regarding placement of the seam on the front window pillar. how far down the pillar is the seam or is it even with the roof line ? Thanks. found pics online but not enough detail to spot the seam 1

Are the twin "rally" stripes available as decals ? Where (Phoenix, Year One doesn't have 'em) ?

1) Demon/Duster scoops - what years/packages for the twin scoops - what years/packages for the snorkel scoop ? And 2) is the new FC7 Plum Crazy identical to the original - looks more intense on the Daytona Charger ?

I've seen a couple of Dusters now (actually a few) with the Cuda AAR style graphic down the side. This month's Mopar Action has one of the baddest I've seen yet with the hood and exhaust to match ... I like it (by the way - can you still find that spoiler?). Has anybody seen a Duster with the...