Search results for query: *

Ok took my valiant there 2 weeks ago to work out bugs on the dyno. We couldn't get it to run right had some sort of ignition or wiring issue. But picked up 40 rwhp so that's the positive. My front seal starting pissin oil so we stopped . I had to leave it there for a few days and he said he...

Ok my car on the dyno decided to mess up one of my exhaust valves are stuck so I'm gonna tear it down again ported eddy heads, 11 to1 408 stroker... So since I'm going to tear it down again, what do u think I should run for a roller cam set up. I have a shop built carb, ported victor intake...

Ok my car still needs dyno time eddy headed 408 Question I have a hughes 3500 in it on the dyno it's flashing at 4200 . Does that mean its on its way out?..or is it a bad batch of converters. My buddy said its hurting hp he said I might want a tighter one so I can get more operating rm out of...

Couldn't finish up today will have final number tommarrow when we finish. 387 hp, 375tq and running pig rich teaser post sheets tommarrow eddy headed 408 small hughes cam Plymouth valiant 408 stroker - YouTube

Going to the track ib 2 weeks. My car runs good im gonna mess with the jets. I have 408 stroker ,Braswell 950 carb the jets are 84 square. U suggest gooing up or down first. And what am I looking for more mph

Anyone ever used one seem light and cool? If u have post expierance and how did it act in pits like cool down I have altenator .but run water pump and fans for a few after passes

71 valiant pro street Ported eddy headed 408 stroker 11 to1 Hyd cam, forged bottom end, ported victor intake, Braswell 950 carb, msd ign, dougs headers 904 rmvb, 3500 vertor low gear 12 point cage 2 seats Mini tubbed 83/4 391 gears Detroit locker, 26x10.5 m/t slicks on it now Perfect...

What is the best temperature u want ur car at when ur drag racing.will high temps hurt e.t.? Only wondering because my car was running at 220 during all my passes.still ran 7.40 in the eighth. Im getting a whole new rad, ele fan set ip friday. Just want to know thats all thanks all race vets

anyone raced at las vegs motor speedway dragsrip?do u get alot of passes because im gonna make a few trips out there to get quarter mile passes.its amlong way to nly get 2 passes..lol...any input would be cool.is tech cool..etc..

okmso i overtightened the rocker nolts and two bolts broke and the shaft broke and pushrods bent and five were under the intake and lifters were out hope when i look in the day time thats all thats wrong with it...lol....im still learning each days cars are a glitch...btw what are the torqe...

Ok I had a 750dp with 50cc pumps..and I talked to a guy on crais list that had a braswell 950hp carb long story short we traded straight up and I called braswell and they confirmed the carb flows a true 1000cfm and is a cost 2k new and it was set up for drag racing and it is really nice had then...

so has anyone been racing there i would like some feedback because i want to start racing again and want to know what unguys thinknabout the track..how crowded and such thanks fabo

Well got my car finally runnning good Saturday night oil pressure was good and finally today it was at 20 psi and then dropped to 0.. long story short 2 gauges later pump is gone any suggestions on what I should do while I have my pan off? Should I put a windage tray on it? And what pump to...

well anyone who lives in or near menifee ca maybe if u have a spare starter or mininstarter for a dart u can sell me that would be cool mine took a pop and imdont want to pay alot of money at autozone thanks pm me

ok sounds dumb but im all done with my valiant and im startnig on my wifes duster..it is a stock 318..i would like people to post 13 second quater mile all motor combos plz she is gonna drive it so no crazy gears or convertors...have fun and post plz

ok tommarrow is gonna be a little tuning for my new solid cammed motor..mopar 408 eddy heads mp590 solid cam carb shop 750 dp msd ign..what do u gurus run for intial and advanced by chance? just want to get a balpark?

Well today got my 408 back up and running..recap went from hyd cam to a mp 590 solid and ported my eddy heads and carn shop carb..well got it fired up just have to tune it now I have to say not to bad of a job.but those solid cams are soooo loud compared to hyd cam really clunky but I know it's...

Hopefully I won't have to worry about my motor mounts breaking again hope y'all like my strap

well in the winter im gonna change my rear end gearing and tire size..just wanted a few pointers and opinions... i have a 71 valiant eddy headed 408 power from 2500 to 6200 i have 3.91 gears and 26 inch tall tires...i want to go faster with out tearing apart my motor....i dont take it on the...

thanks for the input guys..i put a the black spring in the sec quick change spot and i also added a 42 squirter now hesitaton is gone i used my drive way as a burnout box and launch place...lol...thanks again moparts but now my question is im going to the track again now what to do ant...

well my car is a 408 hydralic cam eddy head.motor 904 3500 convertor 3.91 gears..hooks perfect.... my car weighs 2900 with me in it.. this weekend we raced it it ran 13 flat...it has a holley street avenger carb 770....it would hesitate and bog as soon as u went wot and it just didnt run well...

WELL IM IN THE PROCESS IN BUILDING A 408 TURBO VALIANT i just need ut input if u can help its gonnahave about 700hp at the wheels i want to run low tens to high nines and have good street manners i just want some input in the gearing tire size and stall if u can help it would be much...

ok this is my first time doen the track any predictions this is my set up 12 point cage gutted just two alm. race seats 26x10.5 slicks 3.91 gears 408 with edelbrock heads hughes biggest hydrilic cam(canbt remember lift) 10.5 to 1 comp race gas 904 with 4000 stall have slips and videos up...

what do u think ill run am going to run her insept..it my avatar...lol 71 valiant gutted 12 point cage mini tubbed 3.91 gears with m/t 26x11.50 slick 408 stroker with easy 500 hp race 904 with 4000 stall plz tell me aht u think ill rin and if any tips for hooking up will be a good thing...i have...