Search results for query: *

73 225 duster auto. I can only get 5 degrees initial timing before the distributor maxes out on adjustment, but have plenty of retard available. I think the distributor needs to be rotated one tooth but not sure. And if so which way should I rotate it.

Was changing spark plugs and noticed chafing on the drool tube for number 1. Turns out got a bent pushrod. Car ran fine, got compression, no noises, no overly adjusted rockers. Guess I'll just hammer it back straight and continue on with life. Planning to swap in a v8 anyways,, it's just odd. To...

Going to change my oil pan gasket, 73 duster 225. I hear it's a load of fun in the car. Any tips or tricks?

73 duster 225 with Holley 1920. Is the bbs a bolt on conversion or will I have to change any linkages etc?

73 duster. Holley 1920. Looks like the bowl cover is bent at all 4 mounting locations and I'm not sure about the hole, is a barb busted off or what? And the metal blade at base of carb has a gouge in it? See screwdriver pointing to issues. What do I do if I need a new carb?

what do the vacuum lines im pointing at do? I removed the hockey puck manifold and ran the distributor and egr? under the carb together and then to carb vacuum. Is this right, it sure does run better. I also unhooked the vacuum lines going to the air filter housing.

73 scamp, stock 225 /6 car runs great, the issue is after the car sits for a couple days the gas syphons back to the tank, only way to get the car started is to pour gas down the carb. once fuel is to the carb it will start no problem. what is letting the fuel drain back to the tank? the...

ok so i have a brand new edelbrock 600cfm quad sitting around and a stock 225 /6. would i be able to run this carb on a stock engine or is it too big? and what intakes can i buy for it? so far i can think of offy and clifford.

i had a very odd thought about putting a hibourn style air scoop on a /6 sticking out the hood, but of course this would be off center towards the driver side. has anybody ever seen something as a functional scoop for a /6 or would this just look retarded? pics...