Search results for query: *

I finished the rewiring on my Dart, I removed the original dash, and purchased the insert from Redline, popped some holes and installed the Autometer gages. I used the Ron Francis wiring kit. I like the way it was laid out, Each section to be wired is in a separate bag. I started with replacing...

Hi Guys I am running new wires to the trunk area for all the lights. I was not able to find sockets with three wires ( one for ground) but a member here suggested I solder a wire to the socket for ground. Please look at the picture this weather tight connector goes in a hole in the trunk, and...

Hi guys I need to replace these sockets as they are rusted in place. Do I have to remove the bumper to get the housing out? I am currently in the process of rewiring the car. I am looking for opinions as to weather I should spray lizard skin on the floor or use the other stick on matts...

Hello All This is for the front turn signal on my 73 Dart. The sockets need to be changed. Do they come out of this assembly, or must I replace the whole thing? Where would I get this, I need two thank you George

Hello I took the wiring out of my Dart today in preparation for my new gages and wiring kit I was hoping to get some suggestions as to what to do with the center section of the dash and the glove box cover, I bought the plastic insert from redline gage works, and I dont want to do something...

Just got my Ron Francis wiring kit, and my new gages. This will be my next project, if I ever get her running right I completely rebuilt the front end. 30 years ago I worked in a front end shop, so I know front ends pretty well. I bought one of the plastic dash replacements from redline...

Hello all I am missing the keyed washer that goes in front of the wheel bearing in my 73 Dart. I was wondering if someone can direct me where to buy this. Also I dont think tis brake line was connected properly, it mashes into the LCA I think the hose should be rotated 180 degrees. I dont...

I have been trying to work on my Dart for some time, I hate being cold. I replaced all balljoints, upper and lower control arm bushings, strut rod bushings, idler and pitman arms. Had the steering box rebuilt by firm feel. I also replaced the bump stops Could someone tell me what the...

I recently purchased this Dart from ebay. I have not had a Mopar or any project car in 15 years, raising children can drain the resources. I bought this car because there was no rust anywhere, or it had been repaired. The 440 is very strong .030 over pistons and a cam. Actually I was going to...