Search results for query: *

Brand new Rev-n-nator ignition control box with built-in adjustable rev limiter along with all of the original paperwork. Per the manufacturer: "The REV-N-NATOR is a true plug and bolt-in factory-appearing I.C.M. (aka Brain Box) that has been completely re-engineered with digital technology. It...

Listing my rear end parts for sale. I purchased these all separately to go in my Dodge Dart, but didn't end up doing the conversion. The parts are as follows: -8-3/4" rear end housing from a 1968 Roadrunner. Will fit perfect in a similar vintage B-body or a later style A-Body with deeper...

I have a used set of J-heads that came off of a low compression '73 340. They have 73cc combustion chambers (checked them myself with a medical syringe), but they have had the larger 2.02" intake valves installed, and the stock size 1.60" exhaust valves. They also have aftermarket springs with...

Up for sale is my Holley model 3310-3 4160 style carb. It's a vacuum secondary carb rated at 750CFM and the choke assembly was removed by the previous owner. The carb was completely disassembled and rebuilt 8 months ago, but I didn't check the jet or power valve specs because it was on the...

I payed to have my power steering box rebuilt prior to swapping my car over to manual steering. Now it's taking up space and needs to go to a good home. The steering box came out of my '73 Swinger and I bought the kit and paid a local shop to rebuild it. All of the splines are good. I can't...

I ended up installing tubular upper control arms on my Swinger after rebuilding the ones I had, and I haven't had any issues, so I figured I'd list these for sale. They both came off my '73 Swinger. I sanded them down, sprayed some rust-converter primer on them, and shot a single coat of...

Looking to thin out my extra parts here, and have not heard anything back from anyone regarding it being the motor for their car, so I'm looking to sell my extra 1973 model year 340. I have not had a machine shop inspect it due to $$$, but I did perform my own measurements with my digital...

I have a 1973 swinger that I am converting to Manual Steering. I just had the power steering box completely rebuilt with new seals and bearings. It is the 1973-later style with the large sector output (95% sure on this. Will measure tomorrow). I have a brand new Moog Pitman arm for the 73-later...