Search results for query: *

I have a stock 06 5.7 Hemi in my 1970 Dart right now. I have been wanting to build a nice Gen III to replace stock and got a really good deal on this Comp Cams camshaft. It is a "6.1" Hemi cam, NON-VVT, and was told that it is speced for a supercharged application. What kind of engine would you...

My cousin has a plasma table and is getting ready to cut me some flanges that will bolt to the Jeep SRT Hemi manifolds. They are designed for a 3" down pipe. I only found the flanges for $40 each, but he can do it quite a bit cheaper. He can do them in stainless or steel. Is anyone interested?

Anyone done this swap? I am looking to use them to do a future cam swap, and picked them up real cheap. I have done a lot of google searching, and only came up with one Ramforumz posting that state 5.7 springs have an installed height f 1.8" and 6.4's use 2.01" (something along those lines)...

What are you guys doing for cat free manifold down pipes? I was looking through the Walker catalog and could not find big enough 2 bolt flanges. I saw some online but unsure if they would work and did not come with the pipe. What are you guys using? Is there a part number for easy access or are...

I am not sure what the issue is yet or not. But I would like some advice from some experienced guys here. I started with a 2006 car 5.7 Hemi. I swapped the car, Nag1 flex plate for a truck 545RFE flexplate. I then pulled the car oil pan and oil pick up tube. I used the Milodon Oil pick up tube...

I am building the crossmember from subframe connector to subframe connector in my 1970 Dart with a 5.7 hemi, 545rfe trans. Everything is lining up perfectly and I am using a polyurethane transmission mount. My question is, are you guys using the three mounting points from the original...

I have been talking with Rick from Super Radiator (http://stores.ebay.com/Super-Radiator/_i.html?_nkw=&submit=Search&_sid=1013378606), he is in contact with Champion Radiators and they are going to modify the CC526 radiator to be a direct bolt in option for a 5.7 Hemi swap in an A-body for $295...

I bought this MSD in line frame mounted fuel pump with in line filter/regulator and fuel line fittings, including fuel rail adapter. I paid $169.99 plus shipping from speedway motors, selling for $155: http://www.speedwaymotors.com/LS1-Complete-Fuel-Delivery-Kit,41792.html This is the correct...

I am trying to get my firewall done before I put in the 5.7 Hemi. Those of you running the hotwire wiring harness, where is the best place to drill the hole to bring the wiring harness inside the car? Got any pics?

I am looking at some fuel pumps for my 5.7L Hemi swap. I am using the factory fuel injection. What are you guys using for a fuel pump? Are you guys going internal or external pumps? What PSI do you need? Any links to a descent fuel pump?

Are the Hemi Jeep and Durango exhaust manifolds the same, or does the Durango use the Ram manifolds?

I am in the process of collecting all of my parts for my Gen III Hemi swap. I have an 06 5.7 from a Magnum R/T. I also have the exhaust manifolds with the down pipes from the car. Are these usable in an A-Body? I can get a deal on a set of headers from an 04 Ram 1500 also if they would work. I...