Search results for query: *

Just wired the 67 coronet with an ezwire universal harness. Everything works perfect except headlights. The outside lights are bright and work but the inside light barely has any light at all. High beam or low beam doesn't matter. Any ideas?

Having issues with 440 timing in a 67 coronet. It was pinging awful so I tried a few things and now it's not pinging but a bit sluggish and rough idle. Also running hotter. I have 10degrees initial and 28 advance. When I retarded the initial from 15 to 10 it was bad but then I added 10 degrees...

My 67 coronet had a round back alt with 2 wires and external regulator. Anyone know what I need to do to convert to one wire with internal regulator?

Just picked up a coronet with a built 440 but pinging and off idle hesitation. It's got a vacuum dizzy and specs below. Any quick tips to troubleshoot? Also, I'm curious if I should go MSD, aluminum heads with roller rockers. Would i see a big HP gain? Here are the basics. Engine: 1964 440...

Got a fairly new 6A box. Car has been sitting for 6 months and tried to start with no spark. MSD box has 12v going in but nothing coming out to coil. Orange wire to coil has no juice. Is the MSD box bad? We did a large welding project on car with battery disconnected but left the box...

http://www.robbmcperformance.com/products/mopar_starter.html Anyone use one of these starters? Found them on TTI site.

I am running 100amp alt that bench tested 90 amps at 3000rpm. It tested 50amps at idle. It's just not enough at idle and I want to go to higher amp alternator to handle my electric fans, stereo, etc. Is anyone running a high amp alternator? I need to see the bracketry for a Ford or GM style...

I run a 6 rib March setup and need to speed up the alternator. Does anyone know of a good source for small alternator pulleys?

I installed an MSD box today. The engine fired right up but had a rough idle ...almost like a small vaccum leak. Set up a the vaccum gauge to tune the carb and it was all over the map until I turned off the electric fans. As soon as the fans turns off the idle was perfect. I am running a 75 amp...

I am running a Mallory Magnetic Breakerless with Coil/ Ballast Resistor. Would it be worth installing the CD box? I have been told that it would just give me one more point of failure in the system and the gains wouldn't be worth it. I am currently running over 550HP and want it to run as...

I need some help understanding why the coil gets all the juice from the battery when the ignition is left in the on position. Is there anyway to avoid this problem. I have done this twice now when working on the car and have fried two coils. I know you are probably thinking I should have learned...

I have a Mallory electronic dist and my mallory coil was leaking.(Brand new) and went to replace. Had to replace with MSD Blaster (red) coil. Went for a drive and it drives fine but wont hold an idle. I have to keep the rpm at 2k or it will quit. By the way the coil is mounted horizontal if the...

I need help with an intermitent problem starting my car. 1. On Thursday I went for a drive stopped the car and when I tried to start it back up it wouldnt turn over at all. No click, Nothing. After trying a number of key turns and waiting 10 minutes it finally turned over and fire right up...

I just installed a new cluster of gauges. Designer Black Autometer. Maybe my best upgrade ever. The electric programable speedo is sweeeeet. Finally a speedo that you can adjust with the touch of a button. Beware the electric adapter that screws into tranny is very tight and we had modify it to...

Put a bunch of miles on yesterday. Started and stopped ingitiion multiple times. Tried to start today and everything is dead. I thought that maybe I left the radio on or something. Charged the battery and still no response from any part of the electrical system. Alternator is new and recently...

Brand new mopar mini starter on a stroked 360 and it makes a clicking sound. My engine builder/installer tells me they have had problems with this mini starter making noise. It seems to turn quickly and starts fine. Ugly noise considering all the $$$$ I have in this thing. The flexplate is...