Search results for query: *

I am going to be building a chrysler 331 extended bell hemi for a model A coupe. I have chosen the 46rh trans because there is not many choices. The 331 hemi I plan to put a blower on it and mainly street driving. I have never rebuilt a automatic. What mods need to be done while I rebuild the...

Here is something i have never run into before so looking for information. I have a transmission that i forgot to add trans fluid into the trans and drove for a bunch of miles. Now the gear welded to the mainshaft. So i cut the mainshaft and bored it out. I have another mainshaft. Now here...

Picked up this rear axle which i thought was a dana 60. Took the guys word and did not think twice. Ya i know stupid mistake. Glad it was cheap. Anybody know what i have here?

I have been reading but have not found anything yet. I picked up a tr6060 from an '11 srt challenger and planned to mount to a 400 stroker What part number for quicktime do I use for the tr6060? Or who else makes an adapter? RM 8073 says for big block to t56 but does not work with the...

I ran into a bunch of dana axles from trucks in the local wrecking yard. They look exactly like dana 60s but have 248 cast into the housing. I have done some digging on the Internet and from what I can tell they are interchangeable housings. I did notice they have 12 bolt covers though Are...

Been tinkering on this rear diff for a few days now :banghead: 3.55 with sure grip ... how does the pattern look?

i picked up a couple of torque converters for free a few months back. One is new, but used a little. and the other is used. I cant remember what they were for now, i believe 360 they both have 130 teeth with these numbers on them 4519 3 and the other one has 692 any idea what i am looking at?

i just cut down a C body housing to the 52 5/8 lengths the housing started life with a 741 but it blew up. so i installed a 742 case. i have the c body axles as well. I resplined them myself at work and cut one shaft to 27 11/16 (measured from the outside of the flange to the tip of the...