Search results for query: *

Does B&M make a flex plate for a 2001 5.9 Magnum thats weighted? I can't seem to find one that goes past 1999. I have a good 727 with a 2400 stall TC from an older 5.2 LA and would Like to use it. If not, will I have to get a weight kit from MP and weld it onto the TC?

I found a low milage rear end from an 04 Ram 1/2 ton. It VERY cheap. It is complete with a disk brake set-up. How hard is it to change from a rear drum system to a disk? Also, this rear has a flange type yoke. Can that be adapted to a regular u-joint shaft without major buck? Brian

Hey Everyone, I have a recently rebuilt trans in my wife's Town & Country. Since the rebuild, I've got about 10000 mi on it with no problems. I also have a new toy - a transmission flush and fill machine. I am going to drop the pan and change the filter. If I wanted to run a flush solution...

Hey, Has anyone ever tried to stick a 518 into an A body? I have a 73 Swinger and a good 518. I am concerned about having to do a lot of cutting mods. Any input? Brian

Heyy All! Is there a kit or a way to adapt a 518 into an older 727's place? I would like to get OD but I dont know how to control the TCC for lock-up. Brian BTW- The donner trans came from a 91 D250. I could not find a tow-haul button any where. It sort of reminded me of a 727 but it have a...

Will a 904 witha HD rebuild kit work as well as a 727? I am putting together an A body with a 318 with less than 300 hp. I do have a good 727 core. However, I am considering the drive shaft lenght issue and wondering should I go back with a 904. Any suggerstions?

I found a complete 833 at a local u pull. It is a floor shift. It is not a floor top loader. It is a side loader. I know the bell housing is different from a 6 cyl to an 8. I am wanting badly to put this in a 73 Swinger. How much of this will fit. Will the Z bar and shifter fit an A body?will my...

Does anyone have a link to an atricle I remember reading? Someone had made a bracket that adaptedthe shifter from an 833 B body to an A body. I cant seem to find it and remember reading it. Brian

Does anyone know if a crossmember for a 904 will fit onto a 727? My car had a 904 but I am going to use a 727.