Search results for query: *

Well after removing the ground from the frame to in stall the new electric fuel pump, I'm not getting any spark at the plugs when trying to start. The motor cranks and I seam to have power everywhere, I just can't figure it out I did test the system with a spare distributor plug into the FBO...

Ok, still fighting problems with the barracuda and not sure what to do next. I have spark while cranking form coil but not through to the plugs. If I remove the plugs so motor cranks faster and less draw from battery, it can get spark through to the plugs. It look like a weak spark to me. I...

When swapping out an 67-69 a body steering column from auto column shift to 4 speed column, is the wiring harnesses just plug and play? I noticed my auto column has an extra orange wire in the harness where the 4 speed doesn't have one.

Ok, new motor is in. Thought I hooked up everything correctly, but guess not. Before starting I turned key to run position and the fusible link wire starting smoking. I also noticed the harness is getting kind of brittle. Where should I begin to look first, and should I get a new harness...

I'm lost and don't know where to look next. Fuses are all good but I have no dash or headlights. but The turn signals, brake lights, running lights and dome are working fine. Headlight switch?

Any good diagrams for wiring in a alternater kill switch on the upgraded ECU if it matters? I might have done it wrong, I keep killing my battery. Thanks

I fixed my brake lights, but now I have no spark. I have the electronic igniton conversion and have power going to the coil. It's a new coil and still nothing. Can I test the ignition module? What do I try next?

I have power on the thru the stop light switch in the peddle, have turn signals, running lights, but no brake lights? Any ideas where to look?

I have been running the only off the battery, and finally hood up the alternator. The ran for a second and when I went to restart I had no power. I have power up to the starter relay. Where do I begin to look?

Well, I got my carb back form Barry Grant and installed. When I was trying to start the car, it got running for a second and it stalled. I adjusted the timming getting it closer. Theis happened a couple of times. When the next time I went to crank over the motor,all I got was a single click and...

Well I got rid of the stock gauges and installed autometers for everything. Now I don't have these three hooks, the multi plug in the back of gauges, the red power wire, and black ground which both hooked to the back of the stock dash. I thought I only powered the dash, not the whole car? Do I...

I lam looking for a color electrial diagram of the engine compartment for my 67 barracuda.