johnnycuda
JohnnyCuda's 68
Drums came in
Yeah i need two left hand studs!
Yeah i need two left hand studs!
or 10 rh studs and nuts, lol.
the original on thator 10 rh studs and nuts, lol.
Where did you purchase the rear drums from ??
RockautoWhere did you purchase the rear drums from ??
I need a pair myself. Thanks
Were they centric #12363004 ?Rockauto
No problem at all, yes they were centricWere they centric #12363004 ?
Not sure if they're the right ones ?
Sorry for being a p.i.a.
Nope gonna drive it as is.That sucks about frame rot! Know anyone capable to replace it?
Hey guys, Well bought another p code 340 4 Speed car. This one is Rusty!
what was i thinking!
Some of you saw it in the Forsale thread
I’m sure.
“Wrong Trim tag car green”
Here it is leaving Michigan Today.
When guys look at it here in Tucson they are gonna be like was it parked in acid? Lol
Pretty Rusted. Lower Quarters, doors and fenders, rear Valance needs help.
Plan is to make it a driver.
Needs Front brake leak fixed
Passenger Exhaust leak
Tail pipes missing
Missing factory Air cleaner and valve covers.
View attachment 1716264765
View attachment 1716264767
View attachment 1716264768
Well, gentlemen; nothing like an F8 green 67-69 Barracuda FB is there? Specially with a 340 and a 4 speed.Very desirable car to save thats for sure.
I would try to get any loose crud out of frame rails maybe go up with coat hanger try to get loose debri out. Also crud hangs up in the tops of rails by A Arms. If you get debri out of rails and off the top of rails then it wont trap moisture and would slow down the rusting.Bad News guys, Front sub frame is rotted beyond my capabilities.
I will continuation to make it run & drive since i need to make it drivable.
Or buy a Roller to transfer Engine trans rear.
I already ordered the parts i need to do so. Drums, brake lines Etc. she runs now just have to get brake lines on.
Unless i can find someone who can or wants to save this #’s matching 1 of 1074 made 340 4 speed Formula s. Cars.
Here is a pic 2nd pic is looking down from top.
So far investment is $7250.
not buying a carpet that was my plan “$500” and New Tires $300+.
That being said i know anything can be fixed with the right talent and cash.
Just not feasible for me.
View attachment 1716278085
Thx, yes i started doing this!I would try to get any loose crud out of frame rails maybe go up with coat hanger try to get loose debri out. Also crud hangs up in the tops of rails by A Arms. If you get debri out of rails and off the top of rails then it wont trap moisture and would slow down the rusting.
Too late dot 3 already down the hatch.Go to Dot 5 to avoid peeling paint.
You probably don’t care but That’s not a disc brake master cylinderGreat now the master cylinder is leaking in the engine compartment and down the firewall on the inside of the car so I bought myself a new one after breaking the two lines that go down to the proportioning valve, taking it out great all back together now.
View attachment 1716280433
View attachment 1716280434
View attachment 1716280435
View attachment 1716280436
I don’t have disc brakesYou probably don’t care but That’s not a disc brake master cylinder