Hi Guys,
I posted years back about a 360 build I was going to do but for various reason didn't happen but I'm almost at the stage where I'm ready to rebuild my original 318.
I've already purchased a majority of the parts but still need, pistons, cam/lifters and rockers to name the main parts. I'm also thinking of buying a torque plate as the engine guy who will do some work doesn't have one to suit a chrysler small block.
Where is the best place to buy a torque plate from? Don't seem to have much luck looking online.
I'm aiming for 360-400hp mark, but in reality just want something with a nice lump that will go hard if I jump on the gas. I bought heads years ago from Brian at IMM Engines (RHS heads 2.02/1.6, got an Air Gap, Demon 650 D/P so just wondering what you guys would recommend cam wise? I plan on running 3.23 gears with my 904 on standard 14" rims.
Appreciate any and all the advice in advance.
Thanks guy,
Rosco.
I posted years back about a 360 build I was going to do but for various reason didn't happen but I'm almost at the stage where I'm ready to rebuild my original 318.
I've already purchased a majority of the parts but still need, pistons, cam/lifters and rockers to name the main parts. I'm also thinking of buying a torque plate as the engine guy who will do some work doesn't have one to suit a chrysler small block.
Where is the best place to buy a torque plate from? Don't seem to have much luck looking online.
I'm aiming for 360-400hp mark, but in reality just want something with a nice lump that will go hard if I jump on the gas. I bought heads years ago from Brian at IMM Engines (RHS heads 2.02/1.6, got an Air Gap, Demon 650 D/P so just wondering what you guys would recommend cam wise? I plan on running 3.23 gears with my 904 on standard 14" rims.
Appreciate any and all the advice in advance.
Thanks guy,
Rosco.