jkent5368
Well-Known Member
I built a 68 340 got it the car prime the motor and it had 70pds oil pressure. Fired it up and it went up did the brake in on the motor for the rings and cam after doing this went down the next day and fired it up it ran for about 20 min. and the pressure went from 70 to 0 . i went back and checked the oil pump, the bearings, all the oil plugs in the block and the oil filter. I'm at the end can anyone help. One question I put a windage tray in it and put the stock oil pan 5qt. will this work or not :banghead:
Thanks
Thanks