[WANTED] 360 SB Flywheel

[Mean416]

I'm looking for a flywheel so I can run my engine on a test stand without the torque converter. Since this will be low rpm and not used with a clutch, an old worn out flywheel could be fine, all it really needs is that the starter ring gear is in decent shape.

 

[cudamark]

What bell housing are you going to use?

 

[Mean416]

What bell housing are you going to use?

None. I have a starter adapter plate which mounts the starter without the need for a bell housing

 

[74 360 dart sport]

I have 1 off my 360 1974 I will try and find it and let you know

 

[cudamark]

None. I have a starter adapter plate which mounts the starter without the need for a bell housing

if 74 360 Dart Sport doesn't come up with one, I have a truck 360 flywheel. It's a bigger diameter, so, your starter adaptor would need to be adjusted out to match. Shipping would probably cost a small fortune however....

 

[George Jets]

Here is the neutral balance 318 flywheel adapter plate to run on the external balance 360s.

Have one on the 360 on the engine run stand right now with a '69 318 flywheel.

Works fine, starter reaches the ring gear.

Put in 1/8" longer crank bolts if you can find them. I am using the stock crank bolts for the engine tests.

 

[George Jets]

Here is the neutral balance 318 flywheel adapter plate to run on the external balance 360s.

Have one on the 360 on the engine run stand right now with a '69 318 flywheel.

Works fine, starter reaches the ring gear.

Put in 1/8" longer crank bolts if you can find them. I am using the stock crank bolts for the engine tests.


View attachment 1716002724

View attachment 1716002727

Hmmmm . . . .

Here is something I never thought about with this 360 balance adapter plate.

Let's say you have a neutral balance automatic to run with a 360. It says you can use this 360 adapter plate with a neutral balance flex plate too.

Hmmmmm . . . . .