[WANTED] 360 windage tray/bolts/oil pan

-
I think I have an oil pan and I do have a windage tray. Could bring to moparty next week if interested. Let me know and I'll dig em out and send pics.
 
I have no issues in shipping just thought I could save you the shipping cost. I could ship from Bowling Green as it would be closer and possibly quicker. I'll dig out and post pics of what I got.
Thanks
 
Upon investigation I don't believe that it's a 360 pan but this is what I got.

20240907_110151.jpg


20240907_110157.jpg


20240907_110202.jpg


20240907_110206.jpg


20240907_110240.jpg
 
Which ones the small tray bolts or the main bolts ?? I believe the main caps and main bolts are different between 340 and 360.
 
This is a 340 windage tray but can be used by slightly opening the holes. The mopar performance tray (which I believe is still available) has oval shaped holes so ca be used on either.
Click to expand...
 
The main cap bolts. Are they different? When I was reading up on it it seemed like they were the same for 340/360, but the 273/318 bolts were shorter.
 
I thought the 340 bolts were slightly shorter ??
Seems to me that the 360 are slightly wider and taller but I'm not 100% sure. I do believe I have the main bolts with the provisions for the windage tray. I'll look tomorrow as I'm just about to go out the door for the evening.
Thanks
 
Bennoel 10 said:
I thought the 340 bolts were slightly shorter ??
Seems to me that the 360 are slightly wider and taller but I'm not 100% sure. I do believe I have the main bolts with the provisions for the windage tray. I'll look tomorrow as I'm just about to go out the door for the evening.
Thanks
Click to expand...
340/360 bolts are the same length. The MP kits came with the longer 340/360 bolts and 8 hardened washers to be able to use the kit on 273/318 with using 2 washers per bolt. They also had the 4 little bolts with an encaptured washer. Kim
 
The bolts are what really seal the deal. Mancini sells a copy of the tray, but only offers main studs. I've always heard that installing studs requires a line bore, and I have no intention of tearing down my motor at this point.
 
New tray, with the slotted holes so you can use it on 273-318-340-360, and used original bolts. Original pan. Pm me if interested.

image.jpg


image.jpg


image.jpg


image.jpg


image.jpg
 
You must log in or register to reply here.
-

Back
Top