[WANTED] 360 windage tray/bolts/oil pan

indirect_connection · Sep 6, 2024

Looking to replace my leaky oil pan, and want to add the windage tray at the same time. Let me know what you have.

Bennoel 10 · Sep 7, 2024

I think I have an oil pan and I do have a windage tray. Could bring to moparty next week if interested. Let me know and I'll dig em out and send pics.

indirect_connection · Sep 7, 2024

I will not be making it to Moparty. So only if you're interested in shipping.

Bennoel 10 · Sep 7, 2024

I have no issues in shipping just thought I could save you the shipping cost. I could ship from Bowling Green as it would be closer and possibly quicker. I'll dig out and post pics of what I got.
Thanks

Bennoel 10 · Sep 7, 2024

Upon investigation I don't believe that it's a 360 pan but this is what I got.

indirect_connection · Sep 7, 2024

No bolts I assume?

Bennoel 10 · Sep 7, 2024

Which ones the small tray bolts or the main bolts ?? I believe the main caps and main bolts are different between 340 and 360.

Bennoel 10 · Sep 7, 2024

This is a 340 windage tray but can be used by slightly opening the holes. The mopar performance tray (which I believe is still available) has oval shaped holes so ca be used on either.

indirect_connection · Sep 7, 2024

The main cap bolts. Are they different? When I was reading up on it it seemed like they were the same for 340/360, but the 273/318 bolts were shorter.

oldkimmer · Sep 7, 2024

indirect_connection said:
The main cap bolts. Are they different? When I was reading up on it it seemed like they were the same for 340/360, but the 273/318 bolts were shorter.

U r right

Bennoel 10 · Sep 7, 2024

I thought the 340 bolts were slightly shorter ??
Seems to me that the 360 are slightly wider and taller but I'm not 100% sure. I do believe I have the main bolts with the provisions for the windage tray. I'll look tomorrow as I'm just about to go out the door for the evening.
Thanks

oldkimmer · Sep 7, 2024

Bennoel 10 said:
I thought the 340 bolts were slightly shorter ??
Seems to me that the 360 are slightly wider and taller but I'm not 100% sure. I do believe I have the main bolts with the provisions for the windage tray. I'll look tomorrow as I'm just about to go out the door for the evening.
Thanks

340/360 bolts are the same length. The MP kits came with the longer 340/360 bolts and 8 hardened washers to be able to use the kit on 273/318 with using 2 washers per bolt. They also had the 4 little bolts with an encaptured washer. Kim

indirect_connection · Sep 7, 2024

The bolts are what really seal the deal. Mancini sells a copy of the tray, but only offers main studs. I've always heard that installing studs requires a line bore, and I have no intention of tearing down my motor at this point.