3spd to 4spd

[nodemon]

72 Demon ..
I have a 318 3spd manual floor shift.. I purchased a 4spd..and have another 318 I'm putting in. I want to swap the flywheel, clutch and plate from the 3spd 318 to the new 318 and 4spd.. Is that all interchangeable..?

 

[Professor Fate]

Yup. Even the bellhousing should work.
Just make sure your new 318 crank is drilled for a pilot bushing, or have made other plans for it...

 

[nodemon]

Yup. Even the bellhousing should work.
Just make sure your new 318 crank is drilled for a pilot bushing, or have made other plans for it...

Thanks..! Crank is manual ready, so all good there.

 

[bcschief]

I would check and make sure the bell housing is multi pattern drilled I would think it would be.