[WANTED] '64-'65 Barracuda ft bumper, lower valance panel & pair of outer fender extension panels, minor repairable damage ok, preferably in LA, Calif'.

-
VALCUDA

VALCUDA

Active Member
Joined
Feb 8, 2006
Messages
41
Reaction score
4
Location
SYDNEY, AUSTRALIA
Rating - 0%
0   0   0
Contact seller
DSC04185.JPG
OUTER FENDER EXT' PANELS.JPG
 
I am parting one but the valance was sold. Where do those shields mount? Not familiar with them Inner front fenders?
www.forabodiesonly.com

[FOR SALE] - Parting a 64 Cuda slant six car

Tons of good parts on here. A lot of new also. Have the 225 rebuilt also for 1500 Trunnion repair kit $75 Splash shields good shape $50 ea Three rear windows $150 ea pick up only in Central PA Tons of parts. Just do not have the time to take it on. Just ask prob have it.
www.forabodiesonly.com www.forabodiesonly.com
 
Last edited:
VALCUDA said:
The fender extensions bolt to the inner edge of the headlamp bucket and the other end attaches to the radiator support panel with 2 bolts. It may appear to be all part of the fender but they can be separated.

View attachment 1716334133
Click to expand...

I have at least the the passenger side here in L.A./ Eagle Rock. It's still in the fender, but I could probably drill it out?! The fender was hit from the side, but that part is ok.

AP1GczNJJqzZh7TW3bsVs8zDdV_FFq9zUn7B7TPBbfO1M_uu7Ff6nBgk8w5wBdfe7PRNaLNVujyGMEY-EfBOuteT-8JdwF1Y2xamkuR_zyYp7FNzKfSBsFT0CraICZmEDCJKr791NmMohXDB7fzYJn8lxcdDTw=w959-h720-s-no-gm
 
Sounds good! Interesting that it's not bolted but spot welded, is it definitely from a Barracuda? Being in CA is more convenient for me too. Thanks, will wait for photo's. Cheers, Alan.
 
65barracudaLA said:
I have a total of 5 fenders in the garage and two on the car - they are all spot welded. I have never seen one that is bolted.

AP1GczMCEoUk5tY_7nfmW1Dgj9u6qt2gstiUYj8a0aa2JdAt_oQmm8LU5vzjW0bi1HN6SgU6Bu-KE0B0jq1eX-FFUWT8IpLyieyzqukwxDqt55Z5oQgijhBDUwi5b_W3OVFgdcviFZIuF6bspnT0ArkTyABVBw=w776-h1035-s-no-gm


AP1GczPL_sqb-1T-tJMlcoM-mOz1d10qLYpJ6SPCPa_3DNoBdgTDlpzm44JW_qGK4Z8WMQqXBM7d89rDWag5J0RFBNe5YPcyRW0ipdRNEECTm4K9dRKz4Ud_r0RpT5NtCHaN97P3kIBwT7Q-cQMETJNBhH7suw=w776-h1035-s-no-gm


AP1GczOarrATyOpqdBFX1ha9u9KO1_yUeaJW3fGfL2vbAlLMmCVRygrGtwANZ-fyte47LFODCk5OCzw1up_Xg3B1gaZihxPHwhUxZ5-YIrm1jFyCyDQUVpS5tkfsKonLgjmh8PAKvC-cBNsobxkdAcoCjivmcA=w776-h1035-s-no-gm


AP1GczMi3rbEXWpFhEbCRMvPBCbxup88Zh5yoaK1jHTqrTWB7zy0q5tL9amUIfhWvZ3OB9BP5NyFgKKwag_NwDoS6y0_yIfq8pIQ-q6_PH5mJYnr2HcApt-6d8lqXASKgAA43j5ZOW3kIFaiTWNQSTIGVfGOMw=w776-h1035-s-no-gm


I'll still have to dig out the bumper, it's behind some other stuff.

Here's a Valiant valance on craigslist: 64-65 Plymouth Valiant FRONT LOWER VALANCE PANEL - auto parts - by owner - vehicle automotive sale - craigslist

The only difference to the Barracuda is that the turn signals are integrated in the valance.
Click to expand...
Thanks for the photo's & link to valance. Question is are you willing to drill out the spot welds and if so how much for the 2 panels & the bumper when you can dig it out, and send or take them to Stanton near Anaheim?
BTW I've marked on your photo which welds need to be drilled.
Cheers,
Alan.

IMG_8022.jpg
 
Don't worry about the fender extensions, but have you had a chance to get to the bumper as I have someone that may be able to pick it up for me over there but time is of the essence.
 
VALCUDA said:
Don't worry about the fender extensions, but have you had a chance to get to the bumper as I have someone that may be able to pick it up for me over there but time is of the essence.
Click to expand...

I have only one fender that I'd be willing to cut up (passenger side), but it also looks like that the extensions that you had photos off are a bit different anyways. You might be better off finding whole fenders.

Here are some photos of the bumper. The chrome is mostly shot, but it's straight and could be re-chromed I think. There are two marks from a bumper jack on the bottom, but I. think that would be an easy fix. I had this bumper on my car for years. $100? I'm in Eagle Rock, CA 90041

AP1GczPaJkabYDK4WA_WAOpb7DpaOYCYCwOtTXSgsteSALIbaBy9w34oZaReNSoT-HTvGEH6sEFyoF6vonQUgkLhQpbmYFv7td74X5s2keP4jP_rZZIHxgaOxjkNNa6fyXv11W09a2fgvF0MM6GuWHUbeE6Mkw=w1380-h1035-s-no-gm


AP1GczPl0s_ylQrc5MpJWxjl_lawDYwy4YtLduA2usvd8Nom-biJF-F-9fA2Zr4LtBTHAMmmbv35Wja00f6bPkYb1pl6uO7-Wv-ytcoacjC14EAABw_ppmIsEITx9g-ExiuwsIAxGl-zo10Ke_a207S8_hC8ow=w1380-h1035-s-no-gm


AP1GczPwDGu1quzV9jWpZFEqeo9ycOvgX323CISDqfekgAU6UnZwLAkwJdQyiE7iY37E5-lBHEP1OGOzplSQwo2TLHyghJ2FNrj1GsGsQFLFLu_4f3xZgBTtRr6zShhjmVaaWkk82SjpdnqG_4Fjy8yLCBlbmg=w1380-h1035-s-no-gm


AP1GczO5FTYAjjrNnjfyH7tJOZP9T_h0W1OYOxG3GJQe_MT0TrWYjdInU93z8aDt9GtnKiyil9b7HFaE-3sEudTrYTeRH_hwmvRtbO3bC2mmUJBMwI2TGALndIALA1K4mAGpb6aLTang6MGymH71reWMWQJeOQ=w1380-h1035-s-no-gm


AP1GczPgISm4jLgWD1axDiH-IQ8tttAm8InsSlciVe5FcFZl7NXDFoYySB3YYlu0IFK07EEux3FKlDOuBLa8fu1OKxy7z8q5zLgckXjQhMv64OiMHMjWkBCduukl1m8QYQvjIJ81WYesgRW9aZG9F9JE5VoVbA=w1380-h1035-s-no-gm


AP1GczM0EFHNTg6ZQZJyL9Z7fKcLGS_cGAUCWC-qrPySiUi2RxXgP4mpMydkdIRG16t7BX1InGDbRQbEXk8borDFv2dotynp-NxBQ-Bp8PJl_0NDubKJdNss70syYRccXPZsx6mGAgirGWX0nDhkkVfTlsK9dg=w1380-h1035-s-no-gm


AP1GczNrXlEDxUVWaomi2HhFFiK0gLqPRpxUq6E3cfX7Wa60nzcYC0egjk8nazaDJnc1ZVqY_O8gmY0t-rlDQed1cVeFBBLJg3wqjpXN50IqeZNVLLKzPa4IS9enPqn6HX4HoquOZxV2RYGa44qiWwk2oAxcwQ=w1380-h1035-s-no-gm


AP1GczMQixYQhcKLWLMQBFVFXRVU1pvI6tVzpW4ws2D0klE7plnqsdRhgDmyqsfT2fysJaNpNmabF_By_RMmwE-P6qX6STztWl6xE60KwJnAIu7pU755Tuk2blWjQuTCpoVlQTywf--rwO0kVI3cJr7jV9anPQ=w1380-h1035-s-no-gm
 
65barracudaLA said:
I have only one fender that I'd be willing to cut up (passenger side), but it also looks like that the extensions that you had photos off are a bit different anyways. You might be better off finding whole fenders.

Here are some photos of the bumper. The chrome is mostly shot, but it's straight and could be re-chromed I think. There are two marks from a bumper jack on the bottom, but I. think that would be an easy fix. I had this bumper on my car for years. $100? I'm in Eagle Rock, CA 90041

AP1GczPaJkabYDK4WA_WAOpb7DpaOYCYCwOtTXSgsteSALIbaBy9w34oZaReNSoT-HTvGEH6sEFyoF6vonQUgkLhQpbmYFv7td74X5s2keP4jP_rZZIHxgaOxjkNNa6fyXv11W09a2fgvF0MM6GuWHUbeE6Mkw=w1380-h1035-s-no-gm


AP1GczPl0s_ylQrc5MpJWxjl_lawDYwy4YtLduA2usvd8Nom-biJF-F-9fA2Zr4LtBTHAMmmbv35Wja00f6bPkYb1pl6uO7-Wv-ytcoacjC14EAABw_ppmIsEITx9g-ExiuwsIAxGl-zo10Ke_a207S8_hC8ow=w1380-h1035-s-no-gm


AP1GczPwDGu1quzV9jWpZFEqeo9ycOvgX323CISDqfekgAU6UnZwLAkwJdQyiE7iY37E5-lBHEP1OGOzplSQwo2TLHyghJ2FNrj1GsGsQFLFLu_4f3xZgBTtRr6zShhjmVaaWkk82SjpdnqG_4Fjy8yLCBlbmg=w1380-h1035-s-no-gm


AP1GczO5FTYAjjrNnjfyH7tJOZP9T_h0W1OYOxG3GJQe_MT0TrWYjdInU93z8aDt9GtnKiyil9b7HFaE-3sEudTrYTeRH_hwmvRtbO3bC2mmUJBMwI2TGALndIALA1K4mAGpb6aLTang6MGymH71reWMWQJeOQ=w1380-h1035-s-no-gm


AP1GczPgISm4jLgWD1axDiH-IQ8tttAm8InsSlciVe5FcFZl7NXDFoYySB3YYlu0IFK07EEux3FKlDOuBLa8fu1OKxy7z8q5zLgckXjQhMv64OiMHMjWkBCduukl1m8QYQvjIJ81WYesgRW9aZG9F9JE5VoVbA=w1380-h1035-s-no-gm


AP1GczM0EFHNTg6ZQZJyL9Z7fKcLGS_cGAUCWC-qrPySiUi2RxXgP4mpMydkdIRG16t7BX1InGDbRQbEXk8borDFv2dotynp-NxBQ-Bp8PJl_0NDubKJdNss70syYRccXPZsx6mGAgirGWX0nDhkkVfTlsK9dg=w1380-h1035-s-no-gm


AP1GczNrXlEDxUVWaomi2HhFFiK0gLqPRpxUq6E3cfX7Wa60nzcYC0egjk8nazaDJnc1ZVqY_O8gmY0t-rlDQed1cVeFBBLJg3wqjpXN50IqeZNVLLKzPa4IS9enPqn6HX4HoquOZxV2RYGa44qiWwk2oAxcwQ=w1380-h1035-s-no-gm


AP1GczMQixYQhcKLWLMQBFVFXRVU1pvI6tVzpW4ws2D0klE7plnqsdRhgDmyqsfT2fysJaNpNmabF_By_RMmwE-P6qX6STztWl6xE60KwJnAIu7pU755Tuk2blWjQuTCpoVlQTywf--rwO0kVI3cJr7jV9anPQ=w1380-h1035-s-no-gm
Click to expand...
I had a look at a local Australian Valiant which is what those panels are from, that has had a Barracuda grill etc fitted and it appears that they will work with what I have planned.
Are there mounting brackets come with that bumper?
 
Ok, I'll have an associate collect it from you, may be after Christmas as he is flying back here on Friday but will be back regularly to pack stuff for shipping.
If you don't mind hanging onto it until then I would greatly appreciate it.
How would you like payment, is Paypal ok?
Regards,
Alan.
 
You must log in or register to reply here.
-

Back
Top