[WANTED] '64-'65 Barracuda ft bumper, lower valance panel & pair of outer fender extension panels, minor repairable damage ok, preferably in LA, Calif'.
- Thread starter VALCUDA
- Start date
-
Charrlie_S
Well-Known Member
1964-65 Barracuda Valiant A Body Mopar Nice Orig Front Lower Valance - auto parts - by owner - vehicle automotive sale...
As you can see by my photos, this is an original valance panel that was removed from a 1965 Plymouth Barracuda many years ago and stored away. This front Lower Valance Panel is in good used original...
I am parting one but the valance was sold. Where do those shields mount? Not familiar with them Inner front fenders?
www.forabodiesonly.com
[FOR SALE] - Parting a 64 Cuda slant six car
Tons of good parts on here. A lot of new also. Have the 225 rebuilt also for 1500 Trunnion repair kit $75 Splash shields good shape $50 ea Three rear windows $150 ea pick up only in Central PA Tons of parts. Just do not have the time to take it on. Just ask prob have it.
www.forabodiesonly.com
Last edited:
VALCUDA
Active Member
Thanks for the link but that panel has additional park/turn lamps in the lower corners which mine don't have and I afraid his price is a little rich for me.
VALCUDA
Active Member
The fender extensions bolt to the inner edge of the headlamp bucket and the other end attaches to the radiator support panel with 2 bolts. It may appear to be all part of the fender but they can be separated.
65barracudaLA
Well-Known Member
I have at least the the passenger side here in L.A./ Eagle Rock. It's still in the fender, but I could probably drill it out?! The fender was hit from the side, but that part is ok.
65barracudaLA
Well-Known Member
I have a bumper too, I'll take some photos when I'm in the garage next.
VALCUDA
Active Member
Sounds good! Interesting that it's not bolted but spot welded, is it definitely from a Barracuda? Being in CA is more convenient for me too. Thanks, will wait for photo's. Cheers, Alan.
65barracudaLA
Well-Known Member
I have a total of 5 fenders in the garage and two on the car - they are all spot welded. I have never seen one that is bolted.
I'll still have to dig out the bumper, it's behind some other stuff.
Here's a Valiant valance on craigslist: 64-65 Plymouth Valiant FRONT LOWER VALANCE PANEL - auto parts - by owner - vehicle automotive sale - craigslist
The only difference to the Barracuda is that the turn signals are integrated in the valance.
I'll still have to dig out the bumper, it's behind some other stuff.
Here's a Valiant valance on craigslist: 64-65 Plymouth Valiant FRONT LOWER VALANCE PANEL - auto parts - by owner - vehicle automotive sale - craigslist
The only difference to the Barracuda is that the turn signals are integrated in the valance.
VALCUDA
Active Member
Thanks for the photo's & link to valance. Question is are you willing to drill out the spot welds and if so how much for the 2 panels & the bumper when you can dig it out, and send or take them to Stanton near Anaheim?I have a total of 5 fenders in the garage and two on the car - they are all spot welded. I have never seen one that is bolted.
I'll still have to dig out the bumper, it's behind some other stuff.
Here's a Valiant valance on craigslist: 64-65 Plymouth Valiant FRONT LOWER VALANCE PANEL - auto parts - by owner - vehicle automotive sale - craigslist
The only difference to the Barracuda is that the turn signals are integrated in the valance.
BTW I've marked on your photo which welds need to be drilled.
Cheers,
Alan.
VALCUDA
Active Member
Don't worry about the fender extensions, but have you had a chance to get to the bumper as I have someone that may be able to pick it up for me over there but time is of the essence.
65barracudaLA
Well-Known Member
I have only one fender that I'd be willing to cut up (passenger side), but it also looks like that the extensions that you had photos off are a bit different anyways. You might be better off finding whole fenders.
Here are some photos of the bumper. The chrome is mostly shot, but it's straight and could be re-chromed I think. There are two marks from a bumper jack on the bottom, but I. think that would be an easy fix. I had this bumper on my car for years. $100? I'm in Eagle Rock, CA 90041
VALCUDA
Active Member
I had a look at a local Australian Valiant which is what those panels are from, that has had a Barracuda grill etc fitted and it appears that they will work with what I have planned.I have only one fender that I'd be willing to cut up (passenger side), but it also looks like that the extensions that you had photos off are a bit different anyways. You might be better off finding whole fenders.
Here are some photos of the bumper. The chrome is mostly shot, but it's straight and could be re-chromed I think. There are two marks from a bumper jack on the bottom, but I. think that would be an easy fix. I had this bumper on my car for years. $100? I'm in Eagle Rock, CA 90041
Are there mounting brackets come with that bumper?
65barracudaLA
Well-Known Member
I only have three - the driver side (?!) outer is missing.
65barracudaLA
Well-Known Member
I'm sorry, I don't deliver.
VALCUDA
Active Member
Ok, I'll have an associate collect it from you, may be after Christmas as he is flying back here on Friday but will be back regularly to pack stuff for shipping.
If you don't mind hanging onto it until then I would greatly appreciate it.
How would you like payment, is Paypal ok?
Regards,
Alan.
If you don't mind hanging onto it until then I would greatly appreciate it.
How would you like payment, is Paypal ok?
Regards,
Alan.
VALCUDA
Active Member
Can you get back to me on payment for the bumper please?
VALCUDA
Active Member
Will you separate, how much each are you asking & do you have any photos please?
Also, in what suburb are you located ?
65barracudaLA
Well-Known Member
Please send me a pm.
64Bones
Active Member
I can get you photos when I get back home from christmas on the 26th. Currently out of town
VALCUDA
Active Member
I tried to send a PM but not sure if it went through!
-
