67 BARRACUDA EXT. TURN SIGNALS

[WAYNE0]

Could you get exterior turn signal indicators on a 67 barracuda ? If so were they on the fenders or the hood ? Also if they did does the wiring harness have a plug for them ?

 

[66fs]

Hood, plugged into the bulkhead connector.

 

[Super-Cuda]

Could you get exterior turn signal indicators on a 67 barracuda ? If so were they on the fenders or the hood ? Also if they did does the wiring harness have a plug for them ?

I just checked the Hamtrack registry and it doesn't show the hood mounted turn signals for the 1967 Barracuda as an option.

The 1970 Hamtramck Registry - 1967 Plymouth Dealership Data Book - Barracuda

 

[RhinoMan68]

For the 67 model year there was no option for hood/fender mounted turn signal indicators. For the 68 model year they were part of the light package and the under hood was actually modified with holes (provisions) to run the wires (they are hood mounted) through the reinforcement ribs. One way to easily tell if its a 67 or 68 hood (most people think they are the same).

 

[Murray]

Hood mounted indicators 1968 only. Wiring runs through hood reinforcement and connect to main wire loom just above the M/C.

 

[Super-Cuda]

Hood mounted indicators 1968 only. Wiring runs through hood reinforcement and connect to main wire loom

Actually, they were available in 1969 as well.

A01 light package


https://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1969/69_Barracuda0022.jpg

 

[WAYNE0]

so if i wanted to add a pair to my 67 i would have to splice into the front park lights

 

[RhinoMan68]

so if i wanted to add a pair to my 67 i would have to splice into the front park lights

Hate to say it or get yourself a 68 under hood wiring harness and don't use/install the side marker lights, maybe 69 I have seen one to know if the provisions are actually there by default

 

[Bodyperson]

No they are solar powered. Heck ya you can tap them into your existing turn signals.

 

[famous bob]

so if i wanted to add a pair to my 67 i would have to splice into the front park lights

I put them in my front fenders just about even with the radiator cradle /centered in the fender , and connected them to my turn signal wiring , looks good and nice to see ur turn signals are working on a 58 yr old car , w/out looking at the dash ...

 

[WAYNE0]

I put them in my front fenders just about even with the radiator cradle /centered in the fender , and connected them to my turn signal wiring , looks good and nice to see ur turn signals are working on a 58 yr old car , w/out looking at the dash ...

i made a custom dash w/ aftermarket gauges i dont have the indicators on the dash any more like to know if they are working so i figured why not put a pair of exteriors on