[SOLD] 67 to 72 Barracuda fast & notchback Darts Duster

[davescuda]

Any
1969 dart gts emblems
Door and trunk lid

I have just the inside door emblems GT SPORT I may have a door have to look. no trunk lid

 

[63spf]

I have NOS 67 reverse lights assemblies
I have NOS 69 Reverse light assemblies short, medium and the long ones

67 NOS assemblies with lens , How much $ ?

 

[davescuda]

67 NOS assemblies with lens , How much $ ?

500.00 for the 67 NOS reverse light assemblies in factory boxes

 

[383FormulaS67]

67 to 72 Barracuda fast & notchback Darts Duster and more
small blocks big blocks 4 speed
I have been parting these cars over the years. I have stop doing it but I am left with a ton of parts. These are cars that will be sold later. I usually do not do this because it take time to get back to everyone. So if you can be patient this will work.
This is just a small dent in what I have.
Big stuff I would prefer to be picked up
I do have some 63 to 66 and same with 73 to 76 stuff but not much,
If I decided to do my 71 Demon that will be my last car.

Let me know what you are looking for.

View attachment 1715342002

View attachment 1715342006

View attachment 1715342007

View attachment 1715342008

View attachment 1715342010

View attachment 1715342011

View attachment 1715342012

View attachment 1715342013

View attachment 1715342014

Dave I need shock towers for my 67 Barracuda, not sure if you can help with that? My frame rails are OK, but the bottom of the towers are rusted on the inside. I'm looking into if I can cut out the old ones, and weld used one in??

 

[davescuda]

I just a a rust free front clip

 

[moparmat2000]

PM sent

 

[Dust Ya]

I am looking for the upper cowl for a 70 or 71 Duster. Mine got dented and would like to replace by cutting out and welding in a clean panel. The picture shows what i am looking for if you would be willing to cut one out and send it to Arizona. Not looking to replace the entire sheet metal, just the vent. Thank you for your time.

 

[McDart]

Dash pad

View attachment 1715342934

View attachment 1715342935

View attachment 1715342936

View attachment 1715342937

View attachment 1715342938

View attachment 1715342939

Thanks again! Picked up the repaired das pad from my buddy yesterday and dyed it after work this afternoon!

 

[davescuda]

I am looking for the upper cowl for a 70 or 71 Duster. Mine got dented and would like to replace by cutting out and welding in a clean panel. The picture shows what i am looking for if you would be willing to cut one out and send it to Arizona. Not looking to replace the entire sheet metal, just the vent. Thank you for your time.

View attachment 1715353260

I looked today, I do not have a Duster cowl.
thanks for asking dave

 

[davescuda]

Thanks again! Picked up the repaired das pad from my buddy yesterday and dyed it after work this afternoon!

View attachment 1715353316

View attachment 1715353318

View attachment 1715353319

Looks Awesome!!!

 

[davescuda]

NOS Fender 1600.00

 

[davescuda]

Used free fenders
1000.00 to 1200 each

 

[Pro74dartsport]

Do you have a 71 duster tail light panel an if so how much

 

[davescuda]

First set of 69 grills

 

[davescuda]

2nd set of 69 grills

 

[Mike69barracuda]

The price of those 1 and 2............What about the outer chrome surrounds?????????? PM me with pictures THX

 

[davescuda]

Do you have a 71 duster tail light panel an if so how much

I do not have The duster rear tail panel

 

[davescuda]

The price of those 1 and 2............What about the outer chrome surrounds?????????? PM me with pictures THX

1000.00 and 1200.00
I still have to look for more surrounds. iI you were every here you would understand why things take so look to find.

 

[davescuda]

I have 2 factory 1968 383 A body engines

 

[A56]

67 to 72 Barracuda fast & notchback Darts Duster and more
small blocks big blocks 4 speed
I have been parting these cars over the years. I have stop doing it but I am left with a ton of parts. These are cars that will be sold later. I usually do not do this because it take time to get back to everyone. So if you can be patient this will work.
This is just a small dent in what I have.
Big stuff I would prefer to be picked up
I do have some 63 to 66 and same with 73 to 76 stuff but not much,
If I decided to do my 71 Demon that will be my last car.

Let me know what you are looking for.

View attachment 1715342002

View attachment 1715342006

View attachment 1715342007

View attachment 1715342008

View attachment 1715342010

View attachment 1715342011

View attachment 1715342012

View attachment 1715342013

View attachment 1715342014

You'll definitely breath easier when that starts clearing out. Looking for a complete front and intermediate floor pan for my 69 cuda. Thanx in advance

 

[davescuda]

You'll definitely breath easier when that starts clearing out. Looking for a complete front and intermediate floor pan for my 69 cuda. Thanx in advance

I do not have any floor sheet metal. I do Have 318 rust free cars. One with a small interior fire and the other one hit in the right front. Both are notchbacks

 

[wes beem]

do you have a passenger side door arm rest in black for a 1970 dart?

 

[davescuda]

do you have a passenger side door arm rest in black for a 1970 dart?

I will have look

 

[davescuda]

1967 Barracuda reverse light assemblies in box 500.00

1969 Barracuda reverse light assemblies Medium length 600.00

 

[A56]

1967 Barracuda reverse light assemblies in box 500.00

1969 Barracuda reverse light assemblies Medium length 600.00
Those are nice. I see you labeled them medium length. Did they have different lengths for '69s.
View attachment 1715357638

View attachment 1715357639

View attachment 1715357640

View attachment 1715357641

View attachment 1715357642

View attachment 1715357643

View attachment 1715357644

View attachment 1715357645