[SOLD] 68/69 Dart GTS Power lump hood - New pics !!

moparhunter · Nov 12, 2023

68/69 Dart Power bulge / Lump hood
Clearly, it’s off of 69 because it has the 340 emblems in it. But the hood itself is a 68 or 69 style in very good shape .
At this point, I’m going to say pick up only not interested in shipping. I am keeping the chrome off the edge of the hood but that’s it.
Located in Winnipeg, Manitoba Canada.

$800 Canadian

HemiSSDart · Nov 12, 2023

Swinger or GTS emblem holes in the front of the hood?

moparhunter · Nov 12, 2023

doug 371 · Nov 12, 2023

HemiSSDart said:
Swinger or GTS emblem holes in the front of the hood?

I think swinger just had a stick on dodge emblem didn't it?

HemiSSDart · Nov 12, 2023

doug 371 said:
I think swinger just had a stick on dodge emblem didn't it?

Swinger has three holes drivers side, GTS had two in the middle. Looking for a real GTS hood with the holes in the middle. The holes they must have been welded or bondo'd up, easy to see from underneath...

doug 371 · Nov 12, 2023

custom has 3 holes driver side...my 69 hood has no holes

HemiSSDart · Nov 12, 2023

doug 371 said:
custom has 3 holes driver side...my 69 hood has no holes

Then it is an AMD aftermarket hood, they don't come with holes. ALL 69 bulge hoods either had three holes on the drivers side for the DODGE lettering or two holes in the middle for the GTS lettering, no exceptions...

moparhunter · Nov 12, 2023

I’ll have to look tomorrow I don’t know offhand but I believe this came off of GTS it’s definitely an original hood not a re pop

HemiSSDart · Nov 13, 2023

moparhunter said:
I’ll have to look tomorrow I don’t know offhand but I believe this came off of GTS it’s definitely an original hood not a re pop

There are three circular holes in the underhood bracing on the drivers side for the Swinger and they are on all 69 hoods, and there is a large opening in the middle where the GTS lettering would go. Easy to see if they were filled in...

doug 371 · Nov 13, 2023

HemiSSDart said:
Then it is an AMD aftermarket hood, they don't come with holes. ALL 69 bulge hoods either had three holes on the drivers side for the DODGE lettering or two holes in the middle for the GTS lettering, no exceptions...

Mine is oem and definitely never had holes. Maybe the car it's from was in a wreck and had it replaced and the body shop just never drilled it.

moparhunter · Nov 13, 2023

Factory GTS hood

Bennoel 10 · Nov 13, 2023

doug 371 said:
custom has 3 holes driver side...my 69 hood has no holes

"Custom" ? Are you referring to a 1969 Dart Custom or you're saying it is "Custom " meaning it has been customized ie not factory correct. You also state " my 69 hood has no holes" meaning it never came with any badging?? IIRC all 69 darts had some kind of identification insigna on the front of the hood. Also I'm presuming we are talking about a power buldge hood with the 340/383 callouts ? No disrespect but I believe it should or it had something?

Bennoel 10 · Nov 13, 2023

doug 371 said:
Mine is oem and definitely never had holes. Maybe the car it's from was in a wreck and had it replaced and the body shop just never drilled it.

Possible, yes for sure. That's the only reasonable answer. Ordered from the parts department back in the day and never reinstalled the badges.

doug 371 · Nov 13, 2023

Bennoel 10 said:
"Custom" ? Are you referring to a 1969 Dart Custom or you're saying it is "Custom " meaning it has been customized ie not factory correct. You also state " my 69 hood has no holes" meaning it never came with any badging?? IIRC all 69 darts had some kind of identification insigna on the front of the hood. Also I'm presuming we are talking about a power buldge hood with the 340/383 callouts ? No disrespect but I believe it should or it had something?

Yes to 69 Dart Custom and yes to 340 bulge hood