ef8340
Well-Known Member
any time Mike
Summit 6901 cam. a lill beefed up 340 cam. I got Crane valve springs as well.
By the way, http://usbody.com/ makes fiberglass panels for your truck and mine, including flip up front clips. They are 1800$ so i better start saving now lol
Cool! Thanks!
no problem man! I really want the flip up front clip
I'm gonna have to cAll them at some point. I'm wondering if we use our stock (heavy) core support or if they somehow built one in
it looks like it has one built in. the only thing it says you have to cut out your stock fender backs
I'm not even sure what that means.
i think what they mean by that is the back part of your fenders will need cut in order to clear the front of the doors when they tilt forward
Update! She is all together but i haven't nailed spark timing for the cam break-in yet. Im close. It ran for a couple seconds but pretty rough. Gonna get that handled tomorrow. I have a really good feeling about this guys! I am so excited!
Here's everything all together. Finally.
WOW your pictures are Huge...
Im over compensating. :toothy10:
Fired her up today! Fuel is flowing! I had to shut her down immediately before i got very far in sadly. My radiator sprung a pinhole sized leak on very top. Gonna just put a dab of JB Weld on it. My water pump belt also decided the way my alternator was setup was not upto snuff. It jumped off, so I shut her down. Feels horrible. I also have a small leak on my care coming from the rear bowl vent. I think the rear floats are out of back so ill take care of that too.
This is killing me.
Im over compensating. :toothy10:
Fired her up today! Fuel is flowing! I had to shut her down immediately before i got very far in sadly. My radiator sprung a pinhole sized leak on very top. Gonna just put a dab of JB Weld on it. My water pump belt also decided the way my alternator was setup was not upto snuff. It jumped off, so I shut her down. Feels horrible. I also have a small leak on my care coming from the rear bowl vent. I think the rear floats are out of back so ill take care of that too.
This is killing me.
Don't rush it
Anything new?
Lol damn belts anyway! I had to get a water pump put in mine and have the radiator repaired
I am gonna get a new radiator all together. An aluminum one.
My intake turned out to be warped! :banghead: took it to the machine shop and had it fixed. No more redoing the intake gasket for the 5th time. I think it was warped by either my idiocy or my old roommates. I don't care. Don't got time to stick my thumb in my *** and play point the finger.
Picked up a 15480 vbelt and it fits super snug. No more belt jumping I hope lol