[WANTED] .87 or .89 torsion bars wanted for 65 Barracuda

-
I’ll drip mine in a tube and run a quote through the PO and let you know what shipping from
Michigan would be.
 
Here you go. I think “ground advantage” is the old parcel post, which is 6-10 days, where Priority Mail is 2-3 days. That’s from Michigan to North Dakota, although I would assume any middle states would be roughly in that ball park. California would probably be double that.

For reference, the tube is 42” long, 5” tall and 5” wide, with a girth of 14”

827979C0-2E34-4CE6-9DBA-CE91CC0C4107.png
 
cosgig said:
Here you go. I think “ground advantage” is the old parcel post, which is 6-10 days, where Priority Mail is 2-3 days. That’s from Michigan to North Dakota, although I would assume any middle states would be roughly in that ball park. California would probably be double that.

For reference, the tube is 42” long, 5” tall and 5” wide, with a girth of 14”

View attachment 1716303218
Click to expand...
Wow! Not bad at all! Yeah let’s do it! I’m in if you are. Thank you for doing all of this. I’m in no big rush so ground advantage seems just fine so long as that works for you.

And just to be sure these are the .87/ 892-893 L&R correct?

$50 for the pair, plus shipping, anything I can do on my end to help or make it worth your while?

(We still haven’t heard from the local guy for @Dana67Dart and he did say he’d keep the pair regardless if I took them or not, just making sure I’m not disrespecting anyone or wasting anyone’s time)

But yes please let me know what I can do to help and let’s get em comin! Thanks @cosgig !
 
I checked both bars, they’re 892/893. I don’t keep the smaller bars, simply because I don’t need them. I’ll get em finish packed and send over my PayPal ID if you do PayPal.
 
cosgig said:
I checked both bars, they’re 892/893. I don’t keep the smaller bars, simply because I don’t need them. I’ll get em finish packed and send over my PayPal ID if you do PayPal.
Click to expand...
My wife has PayPal and we can use hers no problem whenever works best for you. Thank you!
 
Go to shippo.com and create an account

I show about 15.00 UPS 3 day for same dimensions and 15 lbs

ALSO... USPS HAS CHARGED ME AN ADDITIONAL 15.00 ON A SHIPMENT I RECEIVED BECAUSE IT WAS NOT IN A RECTANGULAR BOX.

MORAL... If you put it in a round tube add some cardboard around the tube to make it rectangular shaped.
 
GHOST RUSTERS said:
Hello FABO,

I am currently refreshing the front end on our 65 Barracuda and would like to find a stronger, decent pair of torsion bars. An ideal setup would be a pair of .87 or .89 torsion bars for the build… also open to any other options, advice or suggestions on the matter from those with more expertise than I.

Willing to pay for shipping or make the drive if within a reasonable distance.

Any and all help is greatly appreciated. Thank you! All the best and happy wrenching!
Click to expand...

If you have not found a pair yet, I have a set I would sell for $50 plus shipping. Mine are 892/893; .870". $50 + shipping from 94526.
 
Bob Jasinski said:
If you have not found a pair yet, I have a set I would sell for $50 plus shipping. Mine are 892/893; .870". $50 + shipping from 94526.
Click to expand...
Hey thank you I appreciate the shoutout but I did just receive a set I purchased from another member but thank you just the same! Good lookin out!
 
You must log in or register to reply here.
-

Back
Top