A-Body 4 Speed Hump location

[j par]

Also I used some window weather stripping around The Edge underneath the hump and used sheet metal self tapping screws. It was nice to sit in the driver's seat and be able to undo the top tranny bolts while sitting in the driver's seat.

 

[dicksmidlac]

Havnt driven it yet but looks like it's gonna work great.Street strip car that's hopefully gonna be ready for engine breakin shortly.

 

[Robin House]

Ouch, noted! Bracket for sure

 

[j par]

Also I welded a massive washer on the outside of the frame to support zbar stud.

 

[Daves69]

This is what can happen with NO bracket at all and a stiff clutch.View attachment 1715297649

Lol, the only thing that hole in the sheet metal is good for is a guide in the positioning of the engine/trans assembly. At the very least it needs the stock bracket.

 

[Johnny71dusty]

All pics post don’t show the hump with seats in . Will I still be able to run my bench seat ? Also is the same hump for us using a A230 3 speed ?

 

[Vamisk]

I believe the hump is far forward enough that a bench seat won’t interfere but I’m not 100%. The same hump is used for the A230 as the A230 is dimensionally almost the same as the 4 speed

 

[Johnny71dusty]

I believe the hump is far forward enough that a bench seat won’t interfere but I’m not 100%. The same hump is used for the A230 as the A230 is dimensionally almost the same as the 4 speedView attachment 1715871683

I hard heard that but wasn’t sure . Does anyone here have a factory 3 or 4 speed with bench seat ?

 

[j par]

That's what that big curve in that shifter is for is to avoid the bench....

 

[Daves69]

..........

4 speed and bench seat pictures | For A Bodies Only Mopar Forum