A-Body Round #2- My '76 Scamp restore...

[Cudakid2967]

Cool. Def keep me posted on any success or lessons... Is there a thread here on your project?

I don't, I should make one, car has been through a lot over last couple years with combinations that have been in and out of it things we've done to it

 

[TT5.9mag]

if you use a stock slant distributor, locked out, you could probably use the vacuum advance plate to phase the rotor. Make the plate lockable and adjust, test, then lock it down.

 

[rich_mc]

if you use a stock slant distributor, locked out, you could probably use the vacuum advance plate to phase the rotor. Make the plate lockable and adjust, test, then lock it down.

Makes sense... I'll have to study that stock one I got as backup to see if I can figure out how much offset between rotor and mag pickup might be achievable.