[WANTED] A833 shifter needed for A body

[Dne007]

Hi, I now have a shifter hump, and an A833 for my '63 Dart. The shifter which came with the trans was just pulled out of a box by the seller of the A833~ I actually don't know if the shifter is any good or not. The shifter does not fit the shifter plate on the transmission. Plus the shifter rods are too long. So, that being said, I'd like a shifter or advice is always nice too. I feel I need the shifter to install the hump correctly.
thanks
dne'

 

[cudajoedart]

Hi, I now have a shifter hump, and an A833 for my '63 Dart. The shifter which came with the trans was just pulled out of a box by the seller of the A833~ I actually don't know if the shifter is any good or not. The shifter does not fit the shifter plate on the transmission. Plus the shifter rods are too long. So, that being said, I'd like a shifter or advice is always nice too. I feel I need the shifter to install the hump correctly.
thanks
dne'

View attachment 1716305369

View attachment 1716305371

Hi looks like a pickup/van shifter you can tell by the grease fitting, it is a hurst and with the correct mounting plate & linkage rods it should work
hope this helps.
Joe

 

[Dne007]

THank you Joe, that gives me a little hope, just need to find the plate which bolts onto the trans;)
dne'

 

[chignikred]

The 'early' hurst shifter body and handle are different. I have what you need but will have to take photos of what I am talking about.
red

 

[cudajoedart]

THank you Joe, that gives me a little hope, just need to find the plate which bolts onto the trans;)
dne'

Your welcome

 

[66fs]

I have a complete 64-65 Hurst shifter, I'll pull it out. Do you need the mounting plate for the trans also?

 

[Capt46]

I have a shifter for console Abody

 

[Dne007]

oh crap, this puts me in a pickle, since 66fs responded first, I should see what he has to say first? and what is a "console" Abody?

I have a shifter for console Abody

I have a shifter for console Ab

 

[Capt46]

oh crap, this puts me in a pickle, since 66fs responded first, I should see what he has to say first? and what is a "console" Abody?

Here’s the shifter HURST NUMBER 45496 no worries if he’s got what you need. I have it if need be.

 

[Capt46]

Also compare to these

 

[Dne007]

I DID NOT KNOW THERE IS A CONSOLE! lol I'm interested in this, and in the fact I could have a console, granted that they can be found?

 

[chignikred]

NO , 63s did not have a console, welcome to learning from the posts on a website.

 

[Dne007]

Yes, Toolmanmike gave the lowdown on this~ but thank you!! ;)