DustinsDuster
Member
Do the countersunk screws and washers go through the shock bolt hole? What are the short support sleeves for?
AJE Tubular Coil Over Front Suspension
- Thread starter subcom
- Start date
-
Yes counter sunk washers and short bolts secure the top of the shock mount to the factory upper shock mount hole. This is the bolt you leave a little loose at first when installing the shock mount. The other bolt and sleeve is the upper coil over mount. The sleeve part goes on the backside of the shock mount. That’s not in the doc but if you don’t there might be slight contact between the coil spring and upper A Arm.
Completely unrelated to your current discussion, but this photo makes it look like you have a ton of positive caster. Did you align the car yet?
Yes I did. It ended up with more positive caster than the previous alignment but I don’t have the numbers in front of me.
Added the Hellwig sway bar for a 73-76 A Body. Bolted up easy and luckily cleared my turbo hotside.
Race cars don’t need sway bars! Haha. JK always awesome when you don’t have to modify stuff to make it work
-
