chargers777
Well-Known Member
- Joined
- Apr 21, 2007
- Messages
- 97
- Reaction score
- 0
Best way to bypass the pin . Don't really want to try and solder it.
Best way to bypass broken fuel gauge cluster pin
- Thread starter chargers777
- Start date
-
67Dart273
Well-Known Member
Is this the sender pin? Frankly I would recommend you learn how to solder. Too bad you are not "here."
Anyhow, if it is the sender, that pin goes direct to the sender stud on the gauge. You COULD clip the wire back from the connector, but a butt splice on a short pigtail, and bolt it under the sender stud/ nut on the gauge
Anyhow, if it is the sender, that pin goes direct to the sender stud on the gauge. You COULD clip the wire back from the connector, but a butt splice on a short pigtail, and bolt it under the sender stud/ nut on the gauge
Find a small machine screw the same diameter and length. Put it through from the back and put a nut on it. Fixed.
-
