Big Issue on harnesses from Classic Industries

[carbuff]

CI part number is MA2273

 

[stretch]

M&H builds them for Year one. Year one is the only place you can get the M&H harness. Year one owns the reproduction connectors for these cars so they are exclusive through Year one.

 

[steves72dartV8]

I have run into three issues ordering wire harnesses for my 1965 Dodge Dart GT. I ordered the under dash, engine/ headlight, and tail light harnesses from Classic Industries.
1. I talked about this in another post. The tail light harnesses includes wiring for backup lights, but the other two do not. I was able to use and modify the wiring from my old harnesses.
2. The rear harness does not include the separate wiring for the trunk lid and it isn’t available. I am using my old trunk lid wiring.
3. Lastly and most frustrating is the connectors on the engine harness are incorrect and will not attach to the bulkhead on the under dash harness. Classic Industries can’t do anything about it. So I found some correct connectors online and can hopefully move the male wire ends to the new connectors. Frustrating!!!
Just wanted to point these issues out in case someone is looking to order harnesses for that time period.

Evans are Excellent and last too!