Chrysler 300 seats in a Duster

-
Clelan

Clelan

Inferno Red Duster
FABO Gold Member
Joined
May 11, 2006
Messages
2,633
Reaction score
3,772
Location
Martensville Sask. Can.
I just purchased these Chrysler 300S seats for less than I could buy supplies to recover my current seats. I know I have seen posts somewhere about doing this, but I cannot find them anywhere?
Has anyone ever used 300,Charger,Challenger seats in their A body? I know the front seats will fit, butI am hoping can make the back seat work too.

Cley
20240425_072400.jpg
20231214_211842.jpg
 
Well it looks like it will work really well! These are just sitting in there, but they fit like a glove! I'll share more as I get further along.

Cley
20240428_190148.jpg
 
Back seats are in for good. They are a 2 piece seat since in the 300 they fold down in 2 different sections so I used a couple pieces of 1/8" x 3/4" aluminum flat stock at 4' long to hold them together. These pieces also hang the seats from the stock upper hangers and bolt them to the rear fire wall. In the second photo it shows the gap between the seat bottom and the side of the car. I will cut a piece of foam to fit there and wrap it in black vinyl.

More on the front seats to come.

Cley
20240429_160446.jpg
20240429_160454.jpg
 
Amazed that 300 seat fits and is actually smaller than stock seat. Especially since the 300 is a "full size" car, and our A bodies were considered compacts lol
 
OneOfMany said:
Amazed that 300 seat fits and is actually smaller than stock seat. Especially since the 300 is a "full size" car, and our A bodies were considered compacts lol
Click to expand...

I did some layout work years ago when I was trying to figure out how to setup my garage and was stunned to find the a '74 Duster without bumper guards was almost the exact same width and length as a 2015 Challenger. Certainly there are differences, and the Challenger is some 5-600# heavier, but overall length and width are almost spot on.
 
Sorry to hijack, but the picture of the new dart seats in the Cuda had me wanting to show my wife. The post is gone, and am hoping original poster could pm me. Thx
 
Fronts are in. They sit high, even after I shaved the factory bench seat mounting hump on the floor. I am 6' tall and they are fine for me. Much taller and they would be uncomfortable. The seats themselves are very nice! I am super happy I chose them.

Cley
20240505_180525.jpg
 
Clelan said:
I just purchased these Chrysler 300S seats for less than I could buy supplies to recover my current seats. I know I have seen posts somewhere about doing this, but I cannot find them anywhere?
Has anyone ever used 300,Charger,Challenger seats in their A body? I know the front seats will fit, butI am hoping can make the back seat work too.

Cley
View attachment 1716241436View attachment 1716241437
Click to expand...
What year did to get these seats out of?
 
I have an update on my seat installation. They are permanently in the car and wired up. Now that I have full battery power, there is more adjustability than I realized. The headroom is quite good. It is definitely as much or more headroom than my 2010 Ram truck has. The seats are super comfortable and they were a great choice for me!

Cley
 
Looks great! Happen to take any pics of said shaving of bench seat hump?

And were you able to use the stock seat belts from the Duster or go to something else?
 
I'm glad I could help! If you would consider subscribing to my channel I'd appreciate it. I'm really close to 1000 subscribers and youtube really promotes videos alot more once you hit 1000.

Cley
 
Clelan said:
I'm glad I could help! If you would consider subscribing to my channel I'd appreciate it. I'm really close to 1000 subscribers and youtube really promotes videos alot more once you hit 1000.

Cley
Click to expand...

Done.
 
Clelan said:
I have an update on my seat installation. They are permanently in the car and wired up. Now that I have full battery power, there is more adjustability than I realized. The headroom is quite good. It is definitely as much or more headroom than my 2010 Ram truck has. The seats are super comfortable and they were a great choice for me!

Cley
Click to expand...
I left a comment on the video, but I’ll ask here as well. Was this additional adjustment/headroom reflected in the video or did you discover the improved headroom after you made/posted the video?
 
If you're a long legged 6'3" you'll be fine. The additional room I found was in the seat adjusters themselves. I have about the same head room as in my 2010 Ram truck.

Cley
 
Clelan said:
Well it looks like it will work really well! These are just sitting in there, but they fit like a glove! I'll share more as I get further along.

Cley
View attachment 1716243119
Click to expand...
Who would have thought. I can see the fronts fitting, but the nice fit for the back seat is a bonus. I guess a modern "Full Size" car is the equivalent to a 70s mid-size car. I have been wanting 6-way power seats in my 69 Barracuda for quite a while. I wonder what just the front seats would cost?
 
I am sure you can find some for a good price. They are common and were available for several years. Charger, Challenger & 300 should all work.

Cley
 
Clelan said:
I am sure you can find some for a good price. They are common and were available for several years. Charger, Challenger & 300 should all work.

Cley
Click to expand...
Any chance you got weights on everything? I'd like some updated seats but I would like to keep the weight down if possible.
 
You must log in or register to reply here.
-

Back
Top