Classic industries radiator finally gave out
- Thread starter 71DodgeDemon340
- Start date
-
71DodgeDemon340
Well-Known Member
the center fins are a little closer than the outer fins, i have around 5/8” of clearance
71DodgeDemon340
Well-Known Member
a lot of work, but amazing what some taping and spray bomb can do lol
71DodgeDemon340
Well-Known Member
Got the radiator in with the shroud and all the hoses on, filled her up with some green juice, gonna fire her up tomorrow and pray no leaks lol.
71DodgeDemon340
Well-Known Member
I ran it 3 times within the last month and so far so good. Ran her on the road for the first time since putting the radiator in. Went to the local car show, temp was around 85 out. Coolant temp never got over 180 even idling around for 5 minutes looking for a parking spot. Coolant temp was fluctuating between 175 and 180 so i assume the system is cycling off of the thermostat which is a high flow 180*. We will see if the temps go up any higher come summer when it gets 95-100 out. Before with the other radiator i was seeing about 190-195.
- Joined
- Mar 17, 2018
- Messages
- 14,801
- Reaction score
- 34,583
It is well done for sure. Looks great!
-
