I'm in the process of installing the A-body disc brake
conversion from Master Power Brakes on my 1967
Barracuda. My 1967 service manual shows the stock
Kelsey-Hayes calipers mounted on the rear side of the spindle.
The conversion spindles have L and R cast on them. When I mount
the spindles according to the markings the calipers come up on the rear
of the spindles just like the stock set-up.
The Mopar Action article says the calipers should be mounted on the front
side of the spindle.
http://www.moparaction.com/tech/archive/disc-main.html
Can someone who has made this conversion using the
Master Power Brake kit please shed some light on this.
Thank you for your help
conversion from Master Power Brakes on my 1967
Barracuda. My 1967 service manual shows the stock
Kelsey-Hayes calipers mounted on the rear side of the spindle.
The conversion spindles have L and R cast on them. When I mount
the spindles according to the markings the calipers come up on the rear
of the spindles just like the stock set-up.
The Mopar Action article says the calipers should be mounted on the front
side of the spindle.
http://www.moparaction.com/tech/archive/disc-main.html
Can someone who has made this conversion using the
Master Power Brake kit please shed some light on this.
Thank you for your help