Espo Springs?
- Thread starter wes beem
- Start date
-
Espo +1
These are ESPO +1 with 255's on 8 inch wheels. Springs are brand new in the pic and haven't been driven.
RGAZ
Diehard
I'm at 28" in the back and 24 1/2" in the front.
michiganpat
Well-Known Member
what size tires in the front? out of curiousity, could you take a shot of the LCA from the front? trying to figure out how you got it that low and still have any suspension travel. I think I'm at 25.5" on my duster with 195/70R14 fronts and I still had to cut my front lower bumpstops to have an inch of clearance between the bumpstops and frame.
Last edited:
michiganpat
Well-Known Member
yup, they do. looks like you're just about to the bump stops. I set mine at about 5/8" gap to the bump stops, then cut a similar to stock profile on my bumpstops about 1/2" lower to get about 1" clearance to the frame. the fact your tires are 1" taller than mine also explains why the top of the tire has a little more tucked up look than mine
michiganpat
Well-Known Member
mine with your old HD 6 leaf springs Brian, tires are 195/70R14 front 225/70R14 rear....I did end up having to play with the rear shackles to get the rear where I wanted it, I used YJ jeep 1" lift shackles from rough country.
JonnyMcSizzle
New Member
SS springs with 275s. Looking into a shorter shackle now to bring the rear to a respectable position.
RGAZ
Diehard
When you find that shackle, post it. I am looking for the same.
RGAZ
-
