fealer gage needed ?
- Thread starter j par
- Start date
-
Sedanman
67-9 Valiant specialist
Hey,it counts! lol
I SEE THE LIGHT!!!!!!!!!!!!!!!!! ...... lol
You have to start somewhere. Before long you will be wanting to calm down the wheel stands.
Lustle
Well-Known Member
As long as a slip of paper fits under it!
It's a wheelie!
It's a wheelie!
bruceo2011
Still waiting for Y2K
Just add Helium.................................
j par
Well-hung Member
The judges have weighed in and it seems as I have my first official wheelie! LOL
340fourspeedDuster
Well-Known Member
Good job!
harrisonm
Well-Known Member
Awesome. So how much horsepower do you have. I KNOW there are a lot of other factors, but I always wondered about how much horsepower it took to yank a mostly street car's front wheels off the ground.
GeorgeH
Well-Known Member
Lustle
Well-Known Member
j par
Well-hung Member
Most of the street car is gone. I've seen so many monster wheelies next to me and I'm thinking - "cool!" then I grab second and never see em again ? Maybe 380hp at the tires? If I put weight in the trunk I'm sure it would stand up no problem. It's cool and all but I'd be afraid of coming down to hard.
famous bob
mopar misfit
--------------
that`s cool, much higher and your wasting time, even tho it looks cool as he--.
yellow rose
Overnight Sensation
If your car weighs 3500 with you in it...that's about 460-465 at the crank. You make enough MPH to run 11.0X so you need to work on the chassis/clutch/shocks so you can get the ET back you are missing.
j par
Well-hung Member
I did weigh it one time (at the scrap yard of course) @ 3000 with me AT THE TIME 2-3 years ago in street rims and tires.
2780 by itself. (I've posted pictures before)
Since I've added 8 point Roll bar and frame connectors, D60 instead of 8 3/4, but 25lbs less per rim and tire up front and in back not sure.
None of this matters much anyhow as the motor/trans combination thats in it now is going to be changed.
2780 by itself. (I've posted pictures before)
Since I've added 8 point Roll bar and frame connectors, D60 instead of 8 3/4, but 25lbs less per rim and tire up front and in back not sure.
None of this matters much anyhow as the motor/trans combination thats in it now is going to be changed.
TrailBeast
AKA Mopars4us on Youtube
Yea, big wheelies are cool, but I'd rather hold one like yours for 1/8 mile. 
RockinRobin
Well-Known Member
Wheels up is wheels up! Good job!
j par
Well-hung Member
Those days are over, unless my son comes a couple of days early for the mopar nationals this year and puts the stroker motor and 4spd back in. Otherwise 318 and 904 for this summer.
I have been told that the first time you pack the front wheels, you will know, because your elbow will smack the arm rest on the door. Have not had that experience as of yet. Not enough HP and two much weight on the nose..... a heavy asz driver don't help either.
For packing one tire you get the rating of.....
For packing one tire you get the rating of.....
j par
Well-hung Member
Probably got the picture on its way back down LOL
-
