yellow rose
Overnight Sensation
Close on some of those. The holes are threaded. And there are 4 of them.
Oil antifreeze separator for when you blow the head gaskets?
Oil mods, feeding main caps?
You're going to have to show us more on that here! I've thought of pressure oil feeding the mains on a big block similar to some early fueler block modifications. I'd like to see how that plumbs up to the positive pressure on the block.
I’ll see if I can draw something up and take a picture. Without something to look at it can be hard to visualize and I don’t have any empty blocks here at the moment.
Is that kinda like "I lost my notes"? ....askin for a friend.
Read#31Umm I think I got it now. He had this thing in the oil pan spraying oil up at the connecting rods
Umm I think I got it now. He had this thing in the oil pan spraying oil up at the connecting rods
did someone say cake....??
View attachment 1715633571
would today's answer to the oiling problem be a smaller diameter rod bearing? 2 or 1.88"? or is there an inherent deficiency in the oiling system at that rpm?
We use to use a rear oiller back in the 70's..extra oil line to the rear of the block that came off the oil pump.
would today's answer to the oiling problem be a smaller diameter rod bearing? 2 or 1.88"? or is there an inherent deficiency in the oiling system at that rpm?
What oiling problem is that? The one YR made up?
See, why come here and be a prick? You’ve never shifted about 5500 so you have NOTHING to add, except being a Dumbfuck and celebrating dumbfuckery.