Zipperd
New Member
Hello Everyone,
I saw this post by TrailBeast: Installing a GM HEI Module
This intrigued me as to how I can get a really hot spark; I drive my car on propane, so strong ignition is very important.
I was wondering if this setup with the 94-97 Dodge Ram truck coil proved to be reliable. (I read that some coils are not suited for use because they make the GM module really hot)
Because I am debating the coil he suggested or the FD478 coil mentioned in this post on a different forum: HEI Electronic Ignition Retrofit How-To - Slant Six Forum.
I am already on the GM ignition module with a round 12v-rated coil.
Warm regards from the Netherlands,
Zip
I saw this post by TrailBeast: Installing a GM HEI Module
This intrigued me as to how I can get a really hot spark; I drive my car on propane, so strong ignition is very important.
I was wondering if this setup with the 94-97 Dodge Ram truck coil proved to be reliable. (I read that some coils are not suited for use because they make the GM module really hot)
Because I am debating the coil he suggested or the FD478 coil mentioned in this post on a different forum: HEI Electronic Ignition Retrofit How-To - Slant Six Forum.
I am already on the GM ignition module with a round 12v-rated coil.
Warm regards from the Netherlands,
Zip